★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★Open research. Global perspectives.
editor@theamericanjournals.comPublisher Home ↗

Increasing The Efficiency Of Thermal Processing Under The Influence Of Magnetic Fields

Authors

  • Umidjon Kasimov Senior Teachers Of The Department “Materials Science And Technology Of New Materials” Of Andijan Institute Of Mechanical Engineering, Uzbekistan
  • Zulfiyaxon Mamataliyeva Senior Teachers Of The Department “Materials Science And Technology Of New Materials” Of Andijan Institute Of Mechanical Engineering, Uzbekistan

DOI:

https://doi.org/10.37547/tajssei/Volume02Issue11-71

Keywords:

Alloying, stamping steel,

Abstract

In this article it is proposed to increase the impact resistance of alloyed stamped steels during magneto thermal treatment without changing the hardness. Determination of the optimal technological parameters for magneto thermal treatment of steels 5ХНМ, ЗХЗМЗФ, 4Х5МФС, 4Х5В2ФС. It is recommended to increase the impact toughness when processing steel 4X5В2ФС with a cyclic magnet in the vertical direction of the samples during magneto thermal treatment.

 

References

Biront V. S. Theory of thermal processing of metals. Combined methods: Uchebnoe posobie / KGATsMiZ. Krasnoyarsk, 2000.

Bida G.V., Nichipuruk A.P. Magnetic properties of thermo-processed steel. Ros. acad. science, Ural. otd-nie, In-t physical metals. Ekaterinburg, 2005.

Maysner D. I., Kosarev V. K. Increasing the wear resistance of woodworking method by magnetic processing. // KGATsMiZ, Sbornik nauchnyx trudov pod red. prof. Statsury V.V. Release.6. Krasnoyarsk, 2000.

Downloads

Published

2020-11-30

How to Cite

Umidjon Kasimov, & Zulfiyaxon Mamataliyeva. (2020). Increasing The Efficiency Of Thermal Processing Under The Influence Of Magnetic Fields. The American Journal of Social Science and Education Innovations, 2(11), 428–434. https://doi.org/10.37547/tajssei/Volume02Issue11-71

Issue

Vol. 2 No. 11 (2020): Volume02 Issue11

Section

Social Sciences

License

Copyright (c) 2020 The American Journal of Social Science and Education Innovations

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.