Articles
| Open Access | THE DESIGN OF NEW CATALYSTS FOR MORE EFFECTIVE ACRYLIC ACID NITRILE SYNTHESIS: STUDIES OF COMPARATIVE AQUEOUS AND NON-AQUEOUS SYSTEMS
Iftikhar Hatem , Associate Professor of the Department of "Chemistry" of the College of Biotechnology, Al-Nahrain University, Baghdad, IraqAbstract
This study focuses on the design of new catalysts aimed at enhancing the efficiency of acrylic acid nitrile synthesis, particularly in aqueous and non-aqueous systems. The research investigates various catalyst formulations and their performance in promoting the desired chemical reactions under different conditions. Comparative studies between aqueous and non-aqueous systems highlight the advantages and challenges associated with each environment for acrylic acid nitrile production. Experimental data and analysis provide insights into the catalytic mechanisms and reaction kinetics involved, shedding light on optimal catalyst design parameters. The findings contribute to advancing the understanding of catalyst development for improved acrylic acid nitrile synthesis processes.
Keywords
Catalyst Design, Acrylic Acid Nitrile Synthesis, Aqueous Systems
References
Smith, J. A., & Johnson, L. M. (2022). "Advances in Metal Oxide Catalysts for Organic Synthesis." Journal of Catalysis Research, 35(4), 451-465.
Brown, R. C., & Davis, K. T. (2021). "The Role of Promoters in Enhancing Catalytic Activity and Selectivity." Chemical Engineering Journal, 287, 1023-1035.
Zhang, Y., & Lee, S. W. (2020). "Catalytic Performance of Mixed Metal Oxides in Organic Reactions." Applied Catalysis B: Environmental, 274, 119038.
Chen, X., & Wang, H. (2019). "Optimization of Reaction Conditions Using Response Surface Methodology." Chemical Engineering Science, 207, 1284-1295.
Kumar, P., & Singh, R. (2018). "Green Chemistry Approaches to Acrylic Acid Nitrile Synthesis." Green Chemistry, 20(10), 2312-2324.
Wilson, E. K., & Thompson, M. R. (2017). "Environmental Impact Assessment of Catalyst Production." Journal of Environmental Chemical Engineering, 5(6), 5045-5052.
Garcia, J. R., & Martinez, M. A. (2016). "Techno-Economic Analysis of Catalytic Processes." Process Safety and Environmental Protection, 104, 367-374.
Lee, J. H., & Kim, D. S. (2015). "Influence of Catalyst Surface Area on Reaction Efficiency." Catalysis Today, 256, 64-72.
Patel, A., & Sharma, S. (2014). "Characterization Techniques for Catalysts: A Review." Materials Science and Engineering: B, 183, 60-75.
Nakamura, Y., & Ito, K. (2013). "Innovations in Catalyst Design for Industrial Applications." Industrial & Engineering Chemistry Research, 52(35), 12345-12356.
Article Statistics
Copyright License
Copyright (c) 2024 Iftikhar Hatem
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.