Articles
| Open Access |
DOI: The Theoretical And Experimental Basis For Calculating And Justifying The Parameters And Regimes Of The Working Areas Of The Cleaning Zone Of Fibrous Materials
Anvar Djurayevich Djurayev , (D.Sc) Doctor Of Science Tashkent Textile And Light Industry Institute, Tashkent, Uzbekistan Shukhrat Latibjonovich Daliyev , (PhD) Doctor Of Philosophy In Technical Sciences Andijan Machine Building Institute, Andijan City, UzbekistanAbstract
In the article, there is the scheme and principle of the work of the cotton cleaner from small litter includes a composite pin drum with elastic elements and a vibrating mesh surface on elastic hinges. Theoretically, the torsional-vibrational motion of a two-mass system of a composite shoe drum has been studied, and the regularities of the dependence of changes in the parameters of the pin drum have been obtained. Based on the approximate analytical solution of the integro-differential equation, the law of angular vibrations of the net surface on the elastic supports of the cotton cleaner is studied. Experimental studies revealed regularities of loading and a change in the speed of rotation of the drum. The results of the full-factor experimental studies of the sample of the composite fluke drum are given. Based on the study of each of the three factors on the changes in the cleansing effect of cotton, the graphical dependencies of the parameters are postrene. The best values of the factors at which a high purifying effect of cotton from small weeds are achieved are recommended. Production tests revealed that the cleaning effect in comparison with the existing version of the drum spindle in the recommended increases by an average of 2.7%.
Keywords
Cleaner, fibrous material, splines, headset, elastic bushing, mesh, oscillation, equations of motion, analytical solution, law, dependence, optimization, testing, loading, cleaning effect
References
Holt, GA; Baker, RV; Brashears, AD. Lint quality and turnout of stripper cotton when bypassing the second stage extractor. APPLIED ENGINEERING IN AGRICULTURE Volume: 18, Issue: 4 P/: 411-415.
Baker, RV; Lalor, WF. Multistage trash extractor for cotton gins. TRANSACTIONS OF THE ASAE. Volume: 33. Issue: 5. P.: 1457-1463.
A.D.Djuraev, J.Mirakhmedov, A.H.Bobamatov, J.M.Mukhamedov, T.Bobomurodov. The mesh surface of the fibrous material cleaner. The patent of the Republic of Uzbekistan FAP 00696 Byulleten №. 2/2012.
А.P.Маvlyanov, А.Djuraev, Sh.L.Daliyev. Working out of designs and methods of calculation of parametres are caustic drums. LAP LAMBERT Academic Publishing, Deutschland, 2016, 134p. Saarbruken 2016.
A.Djurayev, Kuliev T.M. Modeling of grid vibrations on elastic supports of raw cotton cleaner // Improvement of the Construction and Justification of Parameters of the Fibrous Material Regenerator, International Journal of Advanced Science and Technology Vol. 29, No. 8s, (2020), pp. 453-460
A.Djurayev, Kuliev T.M.. Creation of a design and justification of parameters of a single-stage fiber cleaner // International Journal of Advanced Science and Technology Vol. 29, No. 5, (2020), pp. 4522 – 4529
А.D.Djuraev, Sh.L.Daliyev. Development of the design and justification of the parameters of the composite flail drum of a cotton cleaner. European science review Scientific journal, – Vienna, Austria. № 7–8 2017 July–August, 96-99 р.
M. Augambaev, A.Z.Ivanov, Y.I.Gerekhov. Basics of planning a research experiment. Moscow 1986. 53-56 p.
А.Djuraev , K.Yuldashev Dynamics of the Screw Conveyor for Transportation and Cleaning of Fiber Material International Journal of Advanced Science and Technology. Vol. 29, No. 5, (2020), Р. 8557-8566.
А.Djuraev Kuliev T.M. Designing and methods of calculating parameters of a fibrous material cleaner from large litter International Journal of Advanced Science and Technology Vol. 29, No. 8s, (2020), pp. 444-452
А. Djuraev Sh. S. Khudaykulov, A. S. Jumaev Development of the Design and Calculation of Parameters of the Saw Cylinder with an Elastic Bearing Support Jin International Journal of Recent Technology and Engineering (IJRTE) Volume-8 Issue-5, January 2020
D.D.Alijanov, U.A.Axmadaliyev. (2020). The Pecularities Of Automatic Headlights. The American Journal of Engineering and Technology, 13-16.
Article Statistics
Downloads
Copyright License
Copyright (c) 2021 The American Journal of Applied sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.