Analysis Of Methods And Means Of Bump Hazard Prediction
Sayyidkosimov S.S. , DSc, Professor, Head The Department Of Mine Surveying And Geodesy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan. Uzbekistan Kazakov A.N. , PhD, Department Of Mine Surveying And Geodesy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Khakberdiev M.R. , PhD, Department Of Mine Surveying And Geodesy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Tursunbayev D.A. , Master's Degree Student, Department Of Mine Surveying And Geodesy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Tuxsariyev B.B. , Master's Degree Student, Department Of Mine Surveying And Geodesy, Tashkent State Technical University Named After Islam Karimov, Tashkent, UzbekistanAbstract
The article analyzes the methods and tools for predicting the impact hazard in the conditions of underground mining of gold deposits. To assess the stress state of a rock mass, the core disking method is proposed as a basic method. The degree and categories of impact hazard of sections of the rock mass are estimated. Due to the impossibility of solving many problems by geomechanical only field studies.
The reliable efficiency of the use of the finite element method and the boundary element method in predicting the impact hazard of the field sites a priori is shown.
Keywords
Rock pressure, geodynamics, impact hazard, geomechanical state
References
Vlokh N. N. (1994). Management of mountain pressure at underground mines. - M.: Nedra, 208 p.
Ardashev K. A., Akhmatov V. I., Katkov G. A. (1981). Methods and devices for studying the manifestations of mountain pressure: Reference book. M.: Nedra. 128 p.
Shkuratnik V. L., Nikolenko P. V. (2012). Methods for determining the stress-strain state of a rock mass. Moscow: MGGU Publishing House. 112 p.
Rasskazov I. Yu., Iskra A. Yu. (2007). Development of means of acoustic control of dangerous manifestations of mountain pressure. Gorny zhurnal. No.1. p. 85-88.
Avershin S. G. (1969). Gorny udary. M: Utletekhizdat. 210 p.
Timofeev V. V. (2003). Technical and program-methodical means of monitoring dangerous conditions of rock massifs of Khibiny apatite mines. Geodynamic safety in the development of the subsurface and the Earth's surface. Apatity.: publishing house of the Kola Scientific Center of the Russian Academy of Sciences, pp. 168-190.
Batugina I. M., Petukhov I. M. (1988). Geodynamic zoning of deposits in the design and operation of mines. M.: Nedra, 166 p.
Sayyidkosimov S. S., Kazakov A. N., Khakberdiev M. R. (2017). Models of tectonic stress fields in the rock mass under conditions of underground mining of gold deposits. Proceedings of the International Scientific Symposium "Miner's Week 2017". Mining information and analytical bulletin. Special issue 1, p. 23-36.
Zubkov A.V. (2001). Geomechanics and Geotechnology. Yekaterinburg, Uran.
Sayyidkosimov S. S., Kazakov A. N., Khakberdiev M. R. (2017). Models of tectonic stress fields in the rock mass under conditions of underground mining of gold deposits. Mountain information and analytical bulletin. Moscow: special issue. pp. 23-36.
Mukhitdinov Sh. R., Kazakov A. N., Khakberdiev M. R. (2019). Assessment of the category of impact hazard of the rock mass at the Charmian field. Monitoring science and technology. Scientific and technical journal. No. 2. pp. 24-29.
Sayyidkosimov S.S., Kazakov A.N. Khakberdiev M.R. (2019). Modelling of geomechanical processes in the conditions of underground mining of ore deposits. “Traditions and innovations of resource-saving technologies in mineral mining and processing. Universitas " Publishing Petroșani, (Monograph) p. 170-195.
Sayyidkosimov S. S. (2016). Analysis of the stress-strain state of the mountain massif. Republican Scientific and Technical Conference Mining and Metallurgical Complex: Achievements, Problems and Prospects of innovative development” Navoi. p. 14-15.
Kazakov A. N., Rakhimova M. Kh., Khakberdiev M. R. (2018). Four-stage multispectral GIS technology for geomechanical stability control of tailings dams. "Modern problems and prospects for improving rational and safe subsurface use” International Scientific and Technical Conference, 10-12 May. pp. 192-194.
Kazakov A. N., Khakberdiev M. R. (2017). Analysis of methods and tools for predicting impact hazard. International scientific-practical conference "Scientific and personnel support for innovative development of mining and metallurgical complex". Almaty. P. 84-88.
Rahimova H. M., Kazakov, A. N., Shamsieva N. M., Khakberdiev M. R. (2020) Geodezicheskie survey monitoring to ensure the stability of tailings dams MOF AGMK on the nature of the flow of geomechanical processes. International Journal of Research. Volume 07 Issue 04. p. 908-924.
Sayyidkosimov S. S. (2016). Determination of the initial stresses of the rock mass of the Kochbulak deposit. The 6th International Scientific and Practical Conference of young scientists and Students "Experience of the past-a look into the future". Tula, November 2-3, pp. 49-53.
Sayyidkasimov S.S., Rakhimova M.H., Hakberdiyev M.R. (2021). Geodesic And Surveying Observation To Ensure The Stability Of The Tailings Dams Of The Copper Processing Plant Cpp (Copper Processing Plant) Almalyk Mining And Metallurgical Combine Based On The Nature Of Geomechanical Processes. International Journal of Advanced Research in Science, Engineering and Technology Vol. 8, Issue 2,
Kazakov A.N., Khakberdiev M.R., Raximova M.X. (2021). Study of the Stress State of the Massif Around Horizontal Mine Workings with a Vaulted Outline. International Journal of Advanced Research in Science, Engineering and Technology Vol. 8, Issue 2.
Khakberdiev M. R. Tuksariev B. B. Saitov D. T. (2021). Organization of the geodynamic monitoring system for determining deformation phenomena in the deep Muruntau quarry. International scientific and educational electronic journal "Education and science in the xxi century". Vol. 2. Iss.12.
Article Statistics
Downloads
Copyright License
Copyright (c) 2021 The American Journal of Applied sciences

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.