Articles
| Open Access |
DOI: Technology Of Elimination Of Injuries And Deformations In Tam Coverages, Floor Replacement
Mirzaakhmedov Abdukhalim Takhirovich , Candidate Of Technical Sciences, Associate Professor Of The Department Of Construction Of Buildings And Structures, Faculty Of Construction, Fergana Polytechnic Institute, Fergana City, Republic Of UzbekistanAbstract
The article presents the main reasons for the replacement of structural elements of buildings, their operation in different conditions and materials to increase the long-term durability of construction materials.
Keywords
Replacement of structural elements, long-term durability, wrapping structures
References
KMK 1.03.03-97. Instructions on the composition, procedure for the development, coordination and approval of design and estimate documentation for the overhaul of residential and public buildings and structures. - T: 1996, - 30 p.
Abdukhalimjohnovna M. U. Failure Mechanism Of Bending Reinforced Concrete Elements Under The Action Of Transverse Forces //The American Journal of Applied sciences. – 2020. – Т. 2. – №. 12. – С. 36-43.
Mirzaahmedov A. T. et al. Accounting For Non-Linear Work Of Reinforced Concrete In The Algorithms Of Calculation And Design Of Structures //The American Journal of Engineering and Technology. – 2020. – Т. 2. – №. 11. – С. 54-66.
Mirzaakhmedov A. T., Mirzaakhmedova U. A. Prestressed losses from shrinkage and nonlinear creep of concrete of reinforced concrete rod systems //EPRA International journal of research and development (IJRD). – 2020. – Т. 5. – №. 5. – С. 588-593.
Mirzaakhmedov A. T., Mirzaakhmedova U. A. Algorithm of calculation of ferro-concrete beams of rectangular cross-section with one-sided compressed shelf //Problems of modern science and education. Scientific and methodical journal. – 2019. – №. 12. – С. 145.
Makhkamov Yu.M., Mirzababaeva S.M. “Temperature bending of reinforced concrete beams under conditions of technological temperatures influence”. Problems of modern science and education. Scientific and methodical journal. № 11-1 (144), 2019. Part 1. Moscow. P.p.51 – 54.
YM Mahkamov - The American Journal of Engineering and Technology, 2020 Design Model Of Bending Reinforced Concrete Elements Under Action Of Transverse Forces Under Conditions Of Increased And High Temperatures
Article Statistics
Downloads
Copyright License
Copyright (c) 2021 The American Journal of Applied sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.