Articles | Open Access | DOI: https://doi.org/10.37547/tajet/Volume02Issue10-04

Design Model Of Bending Reinforced Concrete Elements Under Action Of Transverse Forces Under Conditions Of Increased And High Temperatures

Mahkamov Y.M. , Associate Professor, Candidate Of Technical Sciences, Department Construction Of Buildings And Structures, Fergana Polytechnic Institute, Fergana, Uzbekistan
Mirzababaeva S.M. , Senior Lecturer, Department Of Construction Of Buildings And Structures, Fergana Polytechnic Institute, Fergana, Uzbekistan

Abstract

In this article, the calculation of the strength and crack resistance of bending elements operating under conditions of high and high temperatures and transverse forces are proposed to be carried out according to a calculation model developed based on an analysis of experimental studies that takes into account more correctly the physics of the stress-strain phenomenon of the element.

Keywords

Bending reinforced concrete element,, transverse force,

References

Makhkamov, J.M. (1984). The resistance of bending reinforced concrete elements under the action of shear forces and high temperatures. Diss…. PhD. Moscow. p. 253.

Mahkamov, Y. M., & Mirzababaeva, S. M. (2020). Strength of bending reinforced concrete elements under action of transverse forces under influence of high temperatures. ACADEMICIA: An International Multidisciplinary Research Journal, 10(5), 618-624.

Makhkamov, Y.M., & Mirzababayeva, S.M. (2019). Formation and development of cracks in bent reinforced concrete elements at high temperatures, their deformation and stiffness. Scientific and technical journal FerPI, (3), 160.160

Makhkamov, J.M., & Mirzababayeva, S.M. (2019). Temperature deflections of reinforced concrete beams under the influence of technological temperatures. Problems of modern science and education, (11-1 (144)).

[Electronic resource]. Access mode: https://cyberleninka.ru/article/n/temperaturnye-progibyzhelezobetonnyh-balok-v-usloviyah-vozdeystviya-tehnologicheskih-temperatur/ (circulation date: 12.12.2019).

Milovanov, A.F., & Pryadko, V.M. (1965). Calculation of bent reinforced concrete elements for a transverse force under conditions of high temperatures. Milovanov AF, Pryadko VM-Moscow: Stroyizdat., 1965, - 135 с.

Wiese J. (1983). Rechnerische Untersuchungen zum Tragund Verformungsverhalten brandbeanspruchter Stahlbetonplatten. Sonderforschungsbereich 148. Brandverhalten von Bauteilen. Technische Universitat Braunschweig. – Arbeitsbericht 1981-1983. Teil 1. Braunschweig, , pp. 169-185.

Krampf L. (1981). Investigations on the shear behaviour of reinforced concrete beams exposed to fire. The Technic University of Brunswick, pp. 28.

КМК 2.03.04-98. (1998). Concrete and reinforced concrete structures designed for operation under conditions of elevated and high temperatures. Т. p.115с.

Article Statistics

Downloads

Download data is not yet available.

Copyright License

Download Citations

How to Cite

Mahkamov Y.M., & Mirzababaeva S.M. (2020). Design Model Of Bending Reinforced Concrete Elements Under Action Of Transverse Forces Under Conditions Of Increased And High Temperatures. The American Journal of Applied Sciences, 2(10), 17–24. https://doi.org/10.37547/tajet/Volume02Issue10-04