Low Temperature Syntesis And Physico-Chemical Characterization Of Mgal2o4 Nanopowder
Fakhriddin Gafurovich Khomidov , PhD Student, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan Zulayho Raimovna Kadyrova , Doctor Of Chemical Sciences, Professor, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan Khikmatulla Lutpullayevich Usmanov , Candidate Of Technical Sciences, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan Shokhista Mansuraliyevna Niyazova , PhD, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of Uzbekistan Bakhtiyor Tokhtayevich Sabirov , Doctor Of Technical Sciences, Professor, Institute Of General And Inorganic Chemistry Of Academy Of Sciences Of The Republic Of UzbekistanAbstract
As a result of the research carried out, conditions have been studied and created for the synthesis of spinel by using the sol-gel method. The kinetics of spinel phase formation has been studied. Received a fine ceramic powder, consisting of the main phase of spinel (MgAl2O4), which is obtained from waste and reactive magnesium oxide grade, having a particle size of 0.5 to 1 micron.
Keywords
Alumina magnesium spinel, sol-gel method, kinetics, phase transformations, X-ray analysis, crystal structure, γ-alumina, refractory materials, nanopowder
References
Liu W., Yang J., Xu H. et al. Effects of chelation reactions between metal alkoxide and acetylacetone on the preparation of MgAl2O4 powders by sol-gel process // Adv. Powder Technol. 2013. V. 24. P. 436 – 440.
Khomidov F.G., Kadyrova Z.R., Usmanov Kh.L., Niyazova Sh.M. Preparation And Sintering Calcium Aluminate Nanopowder By Using Sol Gel Method // The American Journal of Interdisciplinary Innovations and Research. 2021. Vol. 3 Iss. 6. P. 69-74.
Ianoş R., Lazău I., Păcurariu C. Solution combustion synthesis of MgAl2O4 using fuel mixtures // Mater. Res. Bull. 2008. V. 43. P. 3408 – 3415.
Khomidov F. G., Kadyrova Z. R. et.al. Features of the synthesis of magnesium aluminate spinel by sol gel method // Steklo i keramika. 2021. Vol. 6. P. 48-52.
Zarazúa-Villalobos L., Téllez-Jurado J. L., Vargas-Becerril N., Fantozzi G. Synthesis of magnesium aluminate spinel nanopowder by sol–gel and low-temperature processing // J. Sol-Gel Sci. Technol. 2018. No. 85. P. 110 – 120.
Sarkar R. Refractory applications of magnesium aluminate spinel // Inter. Сeram. Refractories Manual. 2010. No. 1. P. 11 – 14.
Sarkar R., Sahoo S. Effect of raw materials on formation and densification of magnesium aluminate spinel // Ceramics International. 2014. V. 40. P. 16719 – 16725.
Adison S., Sirithan J., Supatra J., Karn S. Synthesis and Sintering of Magnesium Aluminate Spinel Nanopowders Prepared by Precipitation Method using Ammonium Hydrogen Carbonate as a Precipitant // Key Engineering Materials. 2016. V. 690. P. 224 – 229
Zhang X. Hydrothermal synthesis and catalytic performance of high-surface-area mesoporous nanocrystallite MgAl2O4 as catalyst support // Mater. Chem. Phys. 2009. V. 116. P. 415 – 420.
Ianoş R., Lazău I., Păcurariu C. Solution combustion synthesis of MgAl2O4 using fuel mixtures // Mater. Res. Bull. 2008. V. 43. P. 3408 – 3415.
Wang C. T., Lin L. S., Yang S. J. Preparation of MgAl2O4 Spinel Powders via Freeze-Drying of Alkoxide Precursors // J. Am. Ceram. Soc. 1992. V. 75. P. 2240 – 2243.
Sanjabi S., Obeydavi A. Synthesis and characterization of nanocrystalline MgAl2O4 spinel via modified sol-gel method // J. Alloys Compd. 2015. V. 645. P. 535 – 540.
Kadyrova Z. R., Tuganova S. K., Éminov A. A. High-temperature interaction between calcium and strontium titanodisilicates // Glass Ceram. 2011. V. 68, No. 11 – 12. P. 413 – 415.
Niyazova Sh. M., Kadyrova Z. R. Usmanov Kh. L., Khomidov F. G. Сhemical and Mineralogical Studies ofMagmatic Rocks of Uzbekistan for Obtaining Heat-Insulating Materials // Glass Ceram. 2019. V. 75, No. 11 – 12. P. 491 – 495.
Article Statistics
Downloads
Copyright License
Copyright (c) 2021 The American Journal of Applied sciences

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.