FORMULATION DEVELOPMENT OF A NEW BITUMINOUS BUILDING COMPOUND
Urinov Abrorbek Akhrorovich , Phd, Assistant, Department Of "Technology Of Oil Refining", Bukhara Institute Of Engineering And Technology, Bukhara City, Republic Of UzbekistanAbstract
The paper presents the results of comparative tests of physical and mechanical properties of experimental samples of construction bitumen composition in laboratory conditions. It is concluded that the experimental sample №11, obtained according to the formulation developed by the author, in comparison with other samples, allows to obtain a high-quality construction bitumen composition. The developed construction bitumen composition is recommended to be used as a waterproofing material as a coating of foundations and building structures.
Keywords
Component, mixture, oil sludge
References
Rahmatova D.M., Musaev M.N., Rakhimov B.B., Khamidov B.N. International journal of advanced research in science, engineering and technology // ISSN: 2350-0328 Obtaining bitumen-substitute mixture from local waste oil and oil-fat production Vol. 8, Issue 10, October 2021. Р 18386-18389.
Khamidov B.N., Urinov A.A. Physical and mechanical parameters of bitumen composition obtained from the residues of oil and oil-fat industry // UNIVERSUM; TECHNICAL SCIENCES, Scientific Journal, Issue: 5 (98) May 2022, Moscow, Part 8., -C. 65-67.
GOST 6617-2021 "Petroleum-containing construction bitumen ", 2021. -17 с.
Khamidov B.N., Urinov A.A. Water absorption and water resistance of the waterproofing material "Polyisol - M" // UNIVERSUM; TECHNICAL SCIENCES, Scientific Journal, Issue: 5 (98) May, 2022, Moscow, Part 8., - P.. 68-70.
Umarov S.S. Physico-chemical aspects of the influence of complex additive on bitumen aging in the conditions of the Republic of Tajikistan: Dissertation of candidate of technical sciences: 05.23.05. - Dushanbe, 2018. -149 с.
Negmatov J.N. Development of compositions and technology for obtaining modified water-soluble powdered gossypol resins for the production of composite polymer drilling reagents: Graduate qualification work - Tashkent, 2018, -89 p.
Article Statistics
Downloads
Copyright License
Copyright (c) 2023 The American Journal of Applied Sciences

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.