Articles
| Open Access |
DOI: Theoretical Analysis Of The Motion Of Raw Cotton With Uniform Feeder In A Cotton Cleaner
Muhsinov Ibrohim , Assistant Of The Department "Technology Of Primary Processing Of Natural Fibers" Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan Isayevshahboz , Assistant Of The Department "Technology Of Primary Processing Of Natural Fibers" Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan Yuldashev Xasanboy , Master Degree Of The Department "Technology Of Primary Processing Of Natural Fibers" Namangan Institute Of Engineering And Technology, Republic Of UzbekistanAbstract
In this scientific work, a theoretical analysis of the movement of raw cotton with a uniform feed of the feeder is considered, the cleaning machines used at the cotton ginning plant.
Keywords
The Cotton, , Saw Gin, Seed
References
Uzakov R.E. et al. “Processing of raw cotton at harvesting points” (review)., Tashkent, UzNIINTI, 1981, pp. 70-75
Gulidov N.G. “Study of the causes of malformation during fiber separation and the development of measures to prevent the formation of defects” (report)., Topic 25. Tashkent, TsNIIHprom, 1951, pp. 50-56
Uldyakov A.I. and others. "Improving the cleaning process of raw cotton machine harvest." (review)., Tashkent, UzNIINTI, 1977, p. 40
Handbook of primary cotton processing. I, II volume, ed., "Mehnat", Tashkent, 1994
Miroshnichenko G.I. Fundamentals of designing machines for primary processing of cotton. M .: Engineering, 1972, p.127-201
Lugachev A.E. "Development of the theoretical foundations of nutrition and cleaning of cotton in relation to the in-line technology of its processing." Abstract of dissertation for the degree of Doctor of Technical Sciences Tashkent, 1998.
ObidovAvazbek, SultonovMirzaolim, MuhksinovIbrohim, The theoretical studies of the cultivation ofthree cotton seeds along the plainEngineering, 2018, 10, 514-520 http://www.scirp.org/journal/eng
Kaybnazarov E. E., Sultanov O. S., Muhsinov I.I. Theoretıcal Analysıs of the Movement of Raw Cotton ın Unıform Feeder Feed ın the New InstallatıonInternational Journal of Advanced Science and Technology Vol. 29, No. 7, (2020), pp. 7970-7974
Umarov A.A., K. Ortikova, A.U. Sarimsakov, D. Kurbanov. Analysis of the control of manual and automatic regulation of the saw gin feed rollers. Scientific journal "Universum: technical sciences". Part 2. Moscow, 2020. - 9 (78). 22-26. https://7universum.com/ru/tech/archive/item/10693
Umarov A., Ortikova K., Sarimsakov A. Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Scientific Research Publishing, Engineering, 2020, 12, 715-722. DOI: 10.4236/eng.2020.1210050.
Umarov A., Akhmedkhodzhaev Kh.,Sarimsakov A.,Kenjaeva M.The Saw Gin Stand with Adjustable Movement of the Roll Box. Scientific Research Publishing, Engineering, 2018, 10, 486-494. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108034.
Sarimsakov A.,Muradov R., Umarov A., Kurbanov D. Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Scientific Research Publishing, Engineering, 2018, 10, 521-529. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108038.
Kh.Axmedxodjayev, A.Umarov, K. Ortiqova. Investigation of the Ginning Process on ДП Series Saw Gin Stands. Scientific Research Publishing, Engineering, 2019, 11, 523-530 http://www.scirp.org/journal/eng.
A.U. Sarimsakov, D. M. Kurbonov, Sh., H. Halikov. The study of the crucible rotation of raw materials with a practical way. Scientific and practical journal "Economy and Society" No. 12 (67) -2019 (December) https://iupr.ru/nauchno_prakticheskiy_zhurnal__ekonomika_i_socium___12_67__2019_g___dekabr_/.
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.