Reduction Of Soil Compression Making Friable Tractor Trace At Pre-Sowing Soil Preparation
Kaypov Mаhamatdin Urazbaevich , PhD, Tashkent State Agrarian University Nukus Branch, Nukus City, The Republic Of Karakalpakstan Utepbergenov Bazarbay Kenesbaevich , PhD, Tashkent State Agrarian University Nukus Branch, Nukus City, The Republic Of Karakalpakstan Ramazanov Bakhitbay Nietbayevich , Senior Teacher, Tashkent State Agrarian University Nukus Branch, Nukus City, The Republic Of KarakalpakstanAbstract
The article is devoted to the analysis of technology for cultivation of agricultural crops in case of the Republic of Karakalpkastan, and research results of MTA’s passage impact on the change of main physical soil features are provided. Along with this the structure and working principle of offered trace-loosen scratcher for «Magnum-8940» for soil loosening along tractor’s wheel tracks. The trace-loosen scratcher fairly suits the tractor “Magnum-8940”.
Keywords
System, passage-soil-crop, the negative impact of tractor’s passage, change of soil features, solidity, soil hardness, loosening
References
Kurvantaev R.K. (1991). Plotnost' slozhenija pochvy i urozhaj hlopchatnika [Soil structure compression and cotton harvest]. Таshkent. RTsNTI «Uzinformagroprom». 88 p.
Muhamedjanov M.V. (1987). V otvete za zemlju. [In response for land]. Mehna.t Тashkent. pp. 10-3.
Kaipov M.U. (2002). Substantiation of main parameters of track-loosen scrater to cultivating tractors. Dissertation of candidate of technical sciences. Yangiyul. pp. 101-107.
Nazirova, R. M., Usmonov, N. B., & Bakhtiyorova, D. (2020). Innovative technologies for grain storage of different crops. Academicia: An International Multidisciplinary Research Journal, 10(6), 222-228.
Abdurakhmonova, N. K., Nazirova, R. M., & Mirsalimova, S. R. (2020). Phosphoric-potash fertilizers based on sulfuric acid processing of phosphorite flour and potassium chloride. Academicia: An International Multidisciplinary Research Journal, 10(10), 252-255.
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.