Engineering and Technology
| Open Access |
DOI: Working Principle and Advantages of The Fsm-230 Solar Panel With Tempered Glass And Anodized Aluminum Frame
Karimov Abdusamat Ismonovich , Dotsent of University of business and science, Namangan, Uzbekistan Ismanov Mukhammadziyo Abdusamat ugli , Dotsent of Namangan State Technical University, Namangan, UzbekistanAbstract
This article describes the main design features, technical characteristics and scope of application of the FSM-230 polycrystalline solar photovoltaic module (230 W). The module consists of an anodized aluminum frame and tempered glass, and has high mechanical strength. Silicon photocells are protected from external environmental influences and mechanical damage due to the fact that they are placed between protective layers based on lamination technology. The FSM-230 module is used in autonomous and backup power supply systems, and together with a charge regulator, battery and inverter, it forms an independent power supply complex. The voltage at the open contacts of the module is 36.6 V, the operating current is 7.8 A, the short-circuit current is 8.42 A, and the efficiency is 16–18%. A plastic waterproof contact box (IP65) and bypass diodes ensure reliable operation of the module. The manufacturer guarantees a 25-year service life of the module and long-term maintenance of power at 80–90%.
Keywords
Polycrystalline photovoltaic module, Photoelectric energy conversion, Tempered glass
References
Abdusamat K., Mamatovich A. S., Muhammadziyo I. Mathematical Modeling of the Technological Processes Original Processing of Cotton //International Journal of Innovation and Applied Studies. – 2014. – Т. 6. – №. 1. – С. 28.
Mardonov B., Tadaeva Y., Muhammadziyo I. Experimental and theoretical studies of vibrational motion of raw cotton on inclined mesh surface //International Journal of Innovation and Scientific Research. – 2014. – Т. 9. – С. 78-85.
Karimov A. I., Ismanov M. Mathematical Modeling of Heat Flux Distribution in Raw Cotton Stored in Bunt //Engineering. – 2020. – Т. 12. – №. 08. – С. 591-599.
Muhammadziyo I. Research Of Characteristics And Analysis Of Calculations Of Optoelectronic Hydrometers Of Automatic Control //Solid State Technology. – 2020. – Т. 63. – №. 6. – С. 14910-14916.
Ismonovich K. A., Abdusamatugli I. M. Modeling the Method of Linear Approximation of Signals in SPLC (Sensor Programmable Logic Controller) //International Journal on Orange Technologies. – 2021. – Т. 3. – №. 10. – С. 55-59.
Mukhammadziyo I. et al. Theoretical and experimental study of the law of distribution of non-stationary heat flux in raw cotton stored in the bunt //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2789. – №. 1.
Magistr M. X. DATA COLLECTION SYSTEM IN THE MANAGEMENT OF TECHNOLOGICAL PROCESSES //International journal of advanced research in education, technology and management. – 2023. – Т. 2. – №. 6.
Karimov A., Ismanov M. ANALYSIS OF ERRORS OF OPTOELECTRONIC MOISTURE METERS //International journal of advanced research in education, technology and management. – 2023. – Т. 2. – №. 5.
Ismonovich K. A. et al. Design Of Programmable Logic Controllers To Adjust The Temperature In The Temporary Storage Buns Of Cotton //Journal of Pharmaceutical Negative Results. – 2022. – С. 3038-3043.
Article Statistics
Copyright License
Copyright (c) 2025 Karimov Abdusamat Ismonovich, Ismanov Mukhammadziyo Abdusamat ugli
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.