Articles
| Open Access |
DOI: Mechatronic control system for accelerator operation in the ginning machine chambe
Sodikjanov Jaxongirbek Shukhratbek oglu , Andijan State Technical Institute, UzbekistanAbstract
This study proposes a mechatronic system concept for real-time control of the accelerator’s speed within the gin’s working chamber. The system uses an ultrasonic sensor to measure the density of cotton fractions and adjusts the motor’s rotational speed via a frequency converter, employing PID control based on motor current analysis. This approach reduces jamming and mechanical damage during cotton transport and enhances seed separation efficiency.
Keywords
Ginning machine, accelerator, speed control
References
Nurmatov A., Kadyrov B. Dynamics and optimization of the Aral gin. *Machine Engineering*, 2024, No. 3, pp. 45–53.
Umarov AA Density-current-velocity relationships. Namangan IET dissertation, 2024.
Smith D., et al. Mechatronic Control Architectures. *IEEE Trans. on Mechatronics*, 2020, vol.25, no.4, pp.567–578.
Article Statistics
Copyright License
Copyright (c) 2025 Sodikjanov Jaxongirbek Shukhratbek oglu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.