Pollution caused by burning the post-harvest agriculture waste and plastic waste in is a very serious problem that needs a solution. The amount of agricultural waste in Egypt ranges from 30 to 35 million tons a year. Out of this amount, only 11 million tons are used as animal feed and organic manure and the rest is burned. Egypt also produces 5.4 million tons of plastics yearly, only 20% of which is recycled. The rest is either burned resulting in highly toxic dioxins or dumped in water sources causing endanger to aquatic life. Egypt does not produce wood and imports more than three billion dollars’ worth of wood yearly, including wood plastic composites (WPC). WPC is a composite material widely used in decking, fencing, garden furniture, cladding, and kitchen cabinets and made of wood fiber, thermoplastics, and additives. This work investigates the sustainable sources to produce WPC from different types of agriculture and plastic wastes. To produce WPC of high quality, the processing, physical, and mechanical testing were carried out on the produced WPC. Three types of post-harvest waste were experimented, orange tree trimmings, cotton stems, and casuarina tree trimmings. Both virgin and recycled High Density Polyethylene (vHDPE & rHDPE respectively) plastic were experimented. Both Maleic Anhydride grafted polyethylene (MAPE) and silane coupling agents were also experimented. Results show that, the compound that had the best WPC properties had the following recipe: orange wood at 50% by weight with 0.11 mesh size, rHDPE at 50%, MAPE coupling agent at 5%.

Agriculture waste, plastic waste, WPC

Malcolm K., Yezid S., Olivia L., Yasmine H., Nadine W., Justin D., and Nada A. “Meeting Egypt’s Environmental Challenges”. Carnegie Middle East Center. https://carnegieendowment.org/research/2023/12 /meeting-egypts-environmental-challenges?lang=en. (Accessed May. 1, 2024).

Shaban D., and Omaima S. The Utilization of Agriculture Waste as one of Environmental Issue in Egypt. Journal of Applied Sciences Research, vol. 6, no. 8, August 2010.

Clemons, C. Wood Plastic Composites in the United States. Forest Product Journal, vol. 52, 2000.

Salim H., “What is Wood Plastic Composite”. Oklahoma State University. https://extension.okstate.edu/fact-sheets/what-is-wood-plastic-composite.html. (Accessed June 14, 2024).

Ammar E., Hitesh P., Shanmugan S., Muthuramalingam T., Ahmed K., and Ramesh B. Recent progresses in wood-plastic composites: Pre-processing treatments, manufacturing techniques, recyclability, and eco-friendly assessment. Cleaner Engineering and Technology, vol. 8, p. 100450, 2022.

Aras, U., Kalaycıoğlu, H., Yel, H., and Bitek, G. Effects of Ammonium Nitrate on Physico-mechanical Properties and Formaldehyde Contents of Particleboard. Procedia - Social and Behavioral Sciences, vol.

, pp. 2130-2134, 2015.

Andrea W., Salim H., and Aldo B. Some of the Properties of Wood Plastic Composite. Proceedings of the 51st International Convention of Society of Wood Science and Technology, Concepcion, CHILE, November 10-12, 2008.

Noor A., Nurain H., Saidatul S., Mohamad S., Norpadzlihatun M., Lee C., Hasan A., and Maizlinda I. A Comparative Study of Physical and Mechanical Properties of Wood Plastic Composite Produced from Different Agriculture Residues. Proceedings of the International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, March 6-8, 2018.

Delia R., Luis P., Luis G., Arturo C., and Haytham A. Analysis of the Mechanical Properties of Wood-Plastic Composites Based on Agriculture Chili Pepper Waste. Maderas, Cienciay tecnología, vol. 18, no. 1, pp. 43 - 54, 2016.

Habibollah K., Reza K., and Arash P. Investigation on Physical and Mechanical Properties of WPC from Corn stalk (Lignocellulosic Fiber) and HDPE. Macromol, Symp, vol. 320, pp. 70–74, 2012.

Khandkar R., Nazrul I., Sourav R., Nabila D., Saleh M., Musa M., and Obaidullah H. Properties of Flat-Pressed Wood Plastic Composites as a Function of Particle Size and Mixing Ratio. Journal of Wood Science, vol. 64, pp. 279-286, 2018.

Ke-Chang H., Heng Y., Teng-Chun Y., Tung-Lin W., Jin-Wei X., and Jyh-Horng W. Characterization of Wood-Plastic Composites Made with Different Lignocellulosic Materials that Vary in Their Morphology, Chemical Composition and Thermal Stability. Polymers, vol. 9, p. 726, 2017.

Kim W., Harper D., and Taylor A. Effect of Wood Species on Water Absorption and Durability of Wood-Plastic-Composites. Wood and Fiber Science, vol. 40, no. 4, pp. 519-531, 2008.

Pelaez S., Yadama M., Garcia-Perez M., Lowell E., Zhu R., and Englund K. Interrelationship between lignin-rich dichloromethane extracts of hot water-treated wood fibers and high-density polyethylene (HDPE) in wood plastic composite (WPC) production. Holzforschung. Vol. 70, no. 1, pp. 31–38, 2016. DOI: 10.1515/hf-2014-0309. 2016.

Rowell R., Sanadi A., Caulfield D., and Jacobson R. Utilization of Natural Fibers in Plastic Composites: Problems and Opportunities. Lignocellulosic Plastic Composites, pp. 23-51, 1999.

Natalia V., Rosane B., Juliana E., Edvaldo S. Dimensional Stability Analysis: Woodplastic Composites. International Conference on Industrial Engineering and Operations Management, Valladolid, Spain, 2013.

Youngquist A., Myers E., Muehl H., Krzysik M., Clemens M., and Padella F., Composites from Recycled Wood and Plastics. US- Environment Protection Agency, 1994.

Li T., and Wolcott M. Rheology of Wood Plastics Melt, part 2: Effects of Lubricating Systems in HDPE/maple Composites. Polym Eng Sci, vol. 46, no. 4, pp. 464-73, 2006.

Gassan, J., and Bledzki, K. The Influence of Fiber-Surface Treatment on the Mechanical Properties of Jute-Polypropylene Composites. Compos. A-Appl. S., vol. 28, p. 1001, 1997.

Simonsen J., Freitag C., Silva A., and Morrell J. Wood/plastic Ratio: Effect on Performance of Borate Biocides Against a Brown Rot Fungus. Holzforschung, vol. 58, no. 2, pp. 205-8, 2005.

Dawson B., and Matuana L. High Density Polyethylene-Wood Flour Composite Lumber: Efficacy of Two Proprietary Biocides in the Control of Fungal Colonization and Discoloration," Holz Roh Werkst., vol. 65, no. 5, pp. 331-4, 2007.

Stark M., White H., Mueller A., and Osswald A. Evaluation of Various Fire Retardants for Use in Wood Flour–Polyethylene Composites. Polym Degrad Stab, vol. 95, no. 9, pp. 1903-10, 2010.

Muasher M., and Sain M. The Efficacy of Photo Stabilizers on the Color Change of Wood Filled Plastic Composites. Polym Degrad Stab, vol. 91, no. 5, pp. 1156-65, 2006.

Qiang T., Yu D., and Gao H. Wood flour/polylactide biocomposites toughened with polyhydroxyalkanoates. J. Appl. Polym. Sci., vol. 124, no. 3, pp. 1831–9, 2012.

Qiang T., Yu D., Gao H., and Wang Y. Polylactide-based wood plastic composites toughened with SBS. Polym. Plast. Technol. Eng., vol. 51, no. 2, pp. 193–8, 2012.

Kajaks J., Kolbins A., and Kalnins K. Some Exploitation Properties of Wood Plastic Composites (WPC) Based on High Density Polyethylene (HDPE) and Plywood Production Waste. IOP Conf. Series: Materials Science and Engineering, 111, 2016.

Madaraka M., Ngugi M., Nzyoki M., and Fondo K. Development of Wood-Plastic Composite at Dedan Kimathi University of Technology, Kenya. Int. Journal of Engineering Research and Applications, vol. 5, no. 12, Part - 4, pp.11-17, December 2015.

Optimat Ltd. and MERL Lta. Wood Plastic Composites Study - Technology and UK Market Opportunities. The Waste and Resources Action Program, Oxon, 2003.

Magda T., Eskander S., and Nawwar G. Hard wood-composites made of rice straw and recycled polystyrene foam wastes. Journal of Applied Polymer Science, May 2017.

Berti S., Burato P., Dionisi-Vici P., and Allegretti O. Orange wood for parquet and engineered flooring use. BioRes. Vol. 13, no. 1, pp. 586-596, 2018.

Espinosa E., Arrebola I., Bascón I., Sánchez M., Domínguez J., and Rodríguez A. Industrial application of orange tree nanocellulose as papermaking reinforcement agent. Cellulose, vol. 27, pp. 10781–10797, 2020.

Porto S., Forim R., Costa C., Fernandes B., and Da Silva F. Evaluation of lignins of trunk and roots from citrus sinensis L. Osbeck: A large available Brazilian biomass. J. Braz. Chem. Soc., vol. 32, pp. 29–39, 2021.

Dong Z., Hou X., Sun F., Zhang L., and Yang Y. Textile grade long natural cellulose fibers from bark of cotton stalks using steam explosion as a pretreatment. Cellulose, vol. 21, pp. 3851–3860, 2014, doi: 10.1007/s10570-014-0401-5.

Mohammad H., Rupak G., Atanu D., Shambhu N., Rakibul I., Shaheen A., and Saidur R. Investigation of the chemical profiles of seven wood species for their potential applications. Wood Material Science & Engineering, vol. 18, no. 2, pp. 650–655, 2023. https://doi.org/10.1080/17480272.2022.2058413.

Jahurul I., Mostafizur R., Taslima F., Jannatun N., Razia P., Chao T., and Sarwar J. Co-pulping of Trewia Nudiflora and Trema Orientalis. TAPPI Journal, vol. 22, no. 6, pp. 411-421. DOI:10.32964/TJ22.6.411.

Mario R., Jorge R., Ana G., and José R. Structural Characterization of the Milled-Wood Lignin Isolated from Sweet Orange Tree (Citrus sinensis) Pruning Residue. Polymers, vol. 15, no. 8, pp. 1840, 2023, https://doi.org/10.3390/polym15081840.

Matthias J., Arunjunai M., Wolfgang A., Peter B., Johannes K., Ulrich M., and Stefan V. The strength and stiffness of oriented wood and cellulose-fibre materials: A review. Progress in Materials Science, vol. 125, pp. 100916, 2022.

Schuetz M., Benske A., Smith A., Watanabe Y., Tobimatsu Y., Ralph J., Demura T., Ellis B., and Samuels L. Laccases direct lignification in the discrete secondary cell wall domains of protoxylem. Plant Physiol., vol. 166, pp. 798–807, 2014. doi: 10.1104/pp.114.245597.

Ithal N., Recknor J., Nettleton D., Maier T., Baum J., and Mitchum G. Developmental transcript profiling of cyst nematode feeding cells in soybean roots. Mol. Plant Microbe Interact., vol. 20, pp. 510–525, 2007. doi: 10.1094/MPMI-20-5-0510.

Kajaks J., Kalnins K., Naburgs R. Wood plastic composites based on high-density polyethylene and birch wood plywood production residues. International Wood Products Journal, vol. 9, no. 1, pp. 15-21, 2018.

Arwinfar F., Hosseinihashemi K., Latibari J., Lashgari A., and Ayrilmis, N., Mechanical properties and morphology of wood plastic composites produced with thermally treated beech wood. Bio Resources, vol. 11, no. 1, pp. 1494-1504, 2016.

Ҫavuş V., and Mengeloglu F. Effect of wood particle size on selected properties of neat and recycled wood polypropylene composites. Bio Resources, vol. 15, no. 2, pp. 3427-3442, 2020.

Dányádi L., Janecska T., Szabo Z., Nagy G., Moczo J., and Pukanszky B. Wood flour filled PP composites: Compatibilization and adhesion. Composites Science and Technology, vol. 67, no. 13, pp. 2838-2846, 2007.

Nami S., Sema A., Evren T., Nural Y., Tsuyoshi Y., and Kunio T. Bio Resources, vol. 8, no. 1, pp. 1222-1244, 2013.

Cezary G., Stanis Z., Marek K., Arnold W., and Jacek M. Effect of Wood Particle Size on Mechanical Properties of Industrial Wood Particle-Polyethylene Composites. Polimery, vol. 56, no. 5, 2011.

Shu-Kai Y., Sushant A., and Rakesh G. Wood–plastic composites formulated with virgin and recycled ABS. Composites Science and Technology, vol. 69, no. 13, pp. 2225-2230, 2009.

Keener T., Stuart R., and Brown T. Maleated coupling agents for natural fiber composites, Composites Part A: Applied Science and Manufacturing, vol. 35, no. 3, pp. 357-362, 2004.

Qin T., Peng X., Changjiang K., Keke L., Aihong K., and Zhengguang W. Physical, chemical and interfacial properties of modified recycled concrete aggregates for asphalt mixtures: A review. Construction and Building Materials, vol. 312, p. 125357, 2021.

Legesse N., Comparative analysis of silane and maleic anhydride coupling agents in wood polymer composites: Adhesion mechanisms and impact on mechanical properties, thesis, Master's Program in Chemical, Biochemical and Materials Engineering, Aalto University, 2022, https://urn.fi/URN:NBN:fi:aalto-202309035512.

Jiuping R., Yonghui Z., and Mizi F. Revealing the Interface Structure and Bonding Mechanism of Coupling Agent Treated WPC. Polymers, vol. 10, no. 266, 2018. doi:10.3390/polym10030266.

Bengtsson M., Gatenholm P., and Oksman K. The effect of crosslinking on the properties of polyethylene/wood flour composites. Compos. Sci. Technol., vol. 65, pp. 1468–1479, 2005.

Bengtsson M., and Oksman K. The use of silane technology in crosslinking polyethylene/wood flour composites. Compos. Part A Appl. Sci. Manuf., vol. 37, pp. 752–765, 2006.

Bengtsson M. Stark M., and Oksman K. Durability and mechanical properties of silane cross-linked wood thermoplastic composites. Compos. Sci. Technol., 67, pp. 2728–2738, 2007.

Cecilia P., Rodrigo A., Edgar A., Franco U. and Carlos A. The Role of Coupling Agents in the Mechanical and Thermal Properties of Polypropylene/Wood Flour Composites. Macromol, vol. 3, no. 1, pp. 65-78, 2023. https://doi.org/10.3390/macromol3010006.

Vijaya B., Nagabhushan E., Kiran V., Appala U., Hrithika G., Srikanta D., Bhanu G., Likitha G., Gopi K., Srinivas M., Sanjana M., and Narasimha S. Enhancement of wood-plastic composite properties in presence of recycled vehicular soot as a carbon source material: Sustainable management approach. Process Safety and Environmental Protection, vol. 174, pp. 286-297, June 2023.