A review of the literature on scientific approaches in the development of composite materials and building structures made of composites is carried out. When creating and manufacturing traditional and new composite materials, for example, by additive manufacturing, and when creating structures and structures in engineering calculations, new techniques, finite element computational software systems, and neural network technologies are used, which are used in the creation of modern metal and composite materials, analysis of mechanical characteristics of materials, forecasting loads on the structure, optimization of structures and calculation of their construction characteristics.

The distinctive features of modern composite materials are shown. The main types of composite materials are considered: talc, diatomite, calcium carbonate, gibbsite, barium sulfate, feldspar, nepheline, aragonite, calcium carbonate, wool, silk, cotton, linen, jute, wood pulp, asbestos, fiberglass, metal fibers, quartz fibers, basalt fibers, polyamide fibers, polyester fibers, polyvinyl alcohol fibers, carbon fibers, viscose fibers. The physical and mechanical characteristics of composite materials (based on epoxy, aluminum, carbon, magnesium, and nickel matrices) and traditional (steel, aluminum, brick, concrete) building materials are presented.

The disadvantages of such composite materials as carbon fiber, fiberglass, organoplastics, textolite, carbon concrete, and polystyrene concrete are presented.

Deformation diagrams of some types of fibers for composite materials are considered: high-modulus carbon fibers, high-strength carbon fibers, aramid fibers, glass fibers, and basalt fibers.

The advantages of the system of external reinforcement of building structures with composite materials are described. Examples of reinforcement of building structures are considered: reinforced concrete reinforcement; reinforcement of floor slabs; reinforcement of columns; and reinforcement of brick walls.

Composite materials, building materials, modulus of elasticity

Dongdong Yang, Shun Dong, Changqing Hong, Xinghong Zhang, Preparation, modification and coating of carbon fiber composites on a carbon basis: review, Ceramics International, 2022, vol. 48, pp. 14935-14958, DOI: 10.1016/j.ceramint.2022.03.055.

Hao Lin, Yangyang Liu, Wenping Liang, Qiang Miao, etc. The effect of the amount of Y2O3 on the oxidizing ability of coatings based on ZrB2-SiC for carbon-carbon composites, J. Europ. Ceramics. Society, 2022, vol. 42, pp. 4770-4782, DOI: 10.1016/J.jeurceramsoc.2022.05.006.

Oreshko E.I., Yerasov V.S., Utkin D.A., Yakovlev N.O. Determination of shear strength of polymer composite materials during indentation. Mechanics of composite materials and structures. 2021. Vol. 27. No. 1. pp. 73-88.

Wang, H.; Schmidt, F.; Hanaor, D.; Kamm, P. H.; Lee, S.; Gurlo, A. Additive manufacturing of ceramics from pre-ceramic polymers is a universal stereolithographic approach based on thiolene alkaline chemistry. Additive manufacturing. 2019, 27, pp. 80-90.

Kovtun V. A., Pasovets V. N. Investigation of the effect of mechanical activation on the processes of structure formation of nanofilled metal-polymer composite materials / Powder metallurgy: surface engineering, new powder composite materials. Welding: Sat. dokl. XI International Exhibition. In 2 volumes 2019. pp. 276-281.

Gaidarzhi Yu. V., Zinin A.V., Azikov N. S. Numerical modeling and analysis of strength and stability of the wafer shell // Journal of Mechanical Engineering and Reliability. - 2021. – Volume 50. – No. 8. – pp. 687-694.

Zichenkov M.Ch., Dzyuba A.S., Dubinsky S.V., Limonin M.V., Pankov A.V., Paryshev S.E. Development of methods of analysis and research of strength of aircraft structures // Flight. - 2018. – No.11. – pp.85-103.

Azikov N. S., Zinin A.V. Model of destruction of an anisogrid composite structure // Journal of Mechanical Engineering and Reliability. - 2018. – Volume 47. – No. 5. – pp. 427-433.

MSC Nastran 2018. Quick Reference Guide, USA, MSC Software Corporation, 2018, 3315 pages.

Oreshko E.I., Yerasov V.S., Lashov O.A., Yakovlev N.O. Investigation of the stability of monolithic and layered plates under compression. Inorganic materials: Applied research. 2022. Vol. 13. No. 2. pp. 588-598.

O. Alekseev, I. E. Alekseeva, L. N. Yasnitsky, and V. L. Yasnitsky, “Self-adaptive intelligent system for mass assessment of the real estate market in cities", Achievements in the field of intelligent systems and computing, volume 850, pp. 81-87, 2019.

Sandbhor and N. B. Chapkhalkar, “The impact of outlier detection on predicting the value of real estate based on neural networks”, Achievements in the field of intelligent systems and computing, volume 862, pp. 481-495, 2019.

Pichugov P.A., Shabiev S.G. Modern methods of using neural networks for designing architecture of buildings and structures. Architecture, Government and Business, No. 38, 2023. pp. 13-24.

Oreshko E.I., Yerasov V.S., Sibaev I.G., Lutsenko A.N., Shershak P.V. Machine learning algorithms (review)* Part 2. Machine learning metrics. decision trees and ensembles of decision trees. A neural network algorithm for predicting the properties of ferritic-martensitic steel. Aviation materials and technologies. 2022. No. 4 (69). pp. 132-146.

Oreshko E.I., Yerasov V.S., Sibaev I.G., Lutsenko A.N., Shershak P.V. Machine learning algorithms (review) part 1. Classification and regression problems. linear algorithms in machine learning. Application of machine learning algorithms to calculate the strength characteristics of materials. Aviation materials and technologies. 2022. No. 3 (68). pp. 130-146.

A. Agirbas. Determining the shape of the facade using swarm intelligence on a machine. Construction, 2019. pp. 140-151.

Li, L.; Wang, R.; Lu, K. The effect of polymer latex on setting time, mechanical properties, and durability of calcium sulfoaluminate cement mortar. Constr. Build. Mater. 2018, 169, 911-922.

Bokhoeva L. A., Baldanov A. B., Rogov V. E., Chermoshentseva A. S., Amin T. The effect of adding nanopowders on the strength of multilayer composite materials. Factory laboratory. Diagnostics of materials. 2021;87(8): pp. 42-50. https://doi.org/10.26896/1028-6861-2021-87-8-42-50

Yasene, A. A. M.; Ismail, M. R.; Afifi, M. S. physico-mechanical properties of irradiated composites for cement mortars modified with latex polymer SBR. The technology of vinyl additives. 2020, 26, 144-154

Malaki, M.; Xu, U.; Kasar, A. K.; Menezes, P. L.; Diringa, H.; Varma, R. S.; Gupta, M. Advanced nanocomposites with a metal matrix. Metals. 2019, 9(3), 330.

Wang, J.; Wang, W.; Geng, H.; Nishi, T.; Zhao, H.; Zhang, L. Development of high-damping composites from acrylic rubber and sliding grafted copolymer. RSC Adv. 2018, 8, 36172.

Yerasov V.S., Oreshko E.I. Mechanical tests and properties of structural aviation metal materials: a textbook / edited by E.N. Kablova. – Moscow: SIC "Kurchatov Institute" – VIAM, 2023. – 344 p.

Rogovina S. Z., Prut E. V., Berlin A. A. Composite materials based on synthetic polymers reinforced with fibers of natural origin // High molecular weight compounds. Series A. T. 61. 2019. No. 4. pp. 291-315.

Kolosova A. S., Sokolskaya M. K., Vitkalova I. A., Torlova A. S., Pikalov E. S. Modern polymer composite materials and their application. International. Journal of Applied and Fundamental Research. 2018. No. 5. pp. 245-256.

Shershak P.V., Yakovlev N.O., Oreshko E.I. Application of optical strain sensors to assess the deformability of samples from polymer composite materials near stress concentrators. Proceedings of VIAM. 2022. No. 1 (107). pp. 111-122.

Dudarkov Yu.I., Levchenko E.A., Limonin M.V. Some features of the assessment of the bearing capacity of stringer panels from PCM // Mechanics of composite materials and structures. 2019. Vol. 25. No. 2. pp. 192 – 206.

Gulyaev A.I., Yerasov V.S., Oreshko E.I., Utkin D.A. Analysis of the destruction of a polymer reinforced with carbon fiber during ejection of a multilayer cylinder. // Polymer Science, Series D. 2022. Vol. 15. No. 4. pp. 574-580.