Articles
| Open Access |
DOI: ANALYSIS OF EXPERIMENTAL TEST RESULTS OF CURRENT AND NEW COMPOSITION COLONS
Sarimsakov Olimjon Sharipjanovich , Namangan Textile Industry Institute, professor, Uzbekistan Ergashev Sharibboy Tulanovich , Namangan Engineerin-Construction Institute, professor, Uzbekistan Shokirov Khasanboy Tuychiboy o‘g‘li , Namangan Engineerin-Construction Institute, PhD student, UzbekistanAbstract
In the process of separating cotton fiber from seed in a sawed fiber separator, the formation of raw material depends on several factors. The most important of them are the speed of rotation of the raw material, fiber, density, the amount of seeds separated from the fiber, etc. In addition, it is necessary to take into account the force of friction created by the walls of the working chamber due to the pressure created in the raw material. A high coefficient of friction of the colossal working surface has a negative effect on work efficiency, in particular, frictional forces cause the seed separated from the fiber to remain on the colossal working surface. These factors have an effect on the performance of the fiber separator and the quality of the extracted fiber. It is known that in the process of ginning, 25% of the fiber and seeds separated from the fiber remain in the raw material pile, causing mechanical damage.
The main goal of the research is to prevent fiber and seed damage in the process of separating cotton fiber from the seed by installing a colosnik structure with the new recommended composition, to increase the efficiency of the seed exit from the working chamber, and at the same time to study ways to reduce energy consumption during the ginning process.
This research paper presents an analysis of the results obtained after installing one of the working parts of the gin machine on the DL-10 gin machine of the existing and recommended composition of colosniks. The main purpose of introducing the new construction is to increase the efficiency of the DL-10 gin machine of the society, to develop it by filling it with new technologies, and to obtain quality fiber and seed.
Keywords
Gin machine, Namangan 34, colosnik with content
References
O‘zbekiston Respublikasi Prezidentining 2022 yil 28 fevraldagi «2022 — 2026-yillarga mo‘ljallangan Yangi O‘zbekistonning taraqqiyot strategiyasini “Insonga e’tibor va sifatli ta’lim yili”da amalga oshirishga oid davlat dasturi to‘g‘risida»gi PF-27-sonli Farmoni. (On February 28, 2022 of the President of the Republic of Uzbekistan "On the state program for the implementation of the development strategy of New Uzbekistan for the years 2022-2026 in the year of attention to people and quality education" Decree No. PF-27.)
Zikriyev E.Z. Paxtani dastlabki qayta ishlash. O‘quv qo’llanma. - T. Mexnat, 2002. - 290 b. (Zikriyev E.Z. Primary processing of cotton. Study guide. - T. Mekhnat, 2002. - 290 p.)
“O‘zpaxtasanoat” uyushmasi “Paxtani qayta ishlashning muvofiqlashtirilgan texnologiyasi”, (PDQI 41-2002; PDI-2007) T. "Mehnat". 2012. – 58 b. ( Association "Uzpakhtasanoat" "Coordinated technology of cotton processing", (PDQI 41-2002; PDI-2007) T. "Labor". 2012. - 58 p.)
X.T. Axmedxodjaev, M.A. Tojiboev, X.N. Sharipov. Tola ajratish jarayonini takomillashtirish: monografiya / - “Navro‘z” nashriyoti, 2021 140 bet. ( Kh.T. Akhmedkhodjaev, M.A. Tojiboev, H.N. Sharipov. Improvement of fiber separation process: monograph / - "Navroz" publishing house, 2021 140 pages.)
Salimov A. Mahsulotlar sifatini aniqlash va sertifikatlash. -Т.: «Fan va texnologiva», 2019, 216 bet. (Salimov A. Product quality determination and certification. - T.: "Science and Technology", 2019, 216 pages.)
Patent UZ № FAP 02331. Sh.T.Ergashev, O.Sh. Sarimsakov, Kh.T. Shokirov, A.O. Sharifjanov. 31.08.2023 y.
Элёрбек Шамсиддинов, & Хасанбой Шокиров (2022). ЖИН МАШИНАСИ ИШЧИ ВАЛИНИНГ ЭГИЛИШИ. Central Asian Academic Journal of Scientific Research, 2 (4), 102-110. (Elyorbek Shamsiddinov, & Khasanboy Shokirov (2022). JEAN CAR DRIVE SHAFT BEND. Central Asian Academic Journal of Scientific Research, 2 (4), 102-110).
Khasanboy, S., & Olimjon, S. (2021). Investigation of the Movement of Cotton Seeds Along the Groove Formed on the Surface of the Grate in the Working Chamber of the Saw Fiber Separator. International Journal on Orange Technologies, 3(9), 103-110.
Sarimsaqov, O. S., Inamova, M. D., & Ortiqova, K. I. (2023). URUGLIK CHIGIT TOLASINI ARRA TISHLARIDAN YECHIB OLISH JARAYONLARI SAMARADORLIGINI OSHIRISH: URUGLIK CHIGIT TOLASINI ARRA TISHLARIDAN YECHIB OLISH JARAYONLARI SAMARADORLIGINI OSHIRISH.
Article Statistics
Copyright License
Copyright (c) 2024 Sarimsakov Olimjon Sharipjanovich, Ergashev Sharibboy Tulanovich, Shokirov Khasanboy Tuychiboy o‘g‘li
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.