Articles
| Open Access |
DOI: Development Of A New Brand Of Alloy Instead Of 280x29nl Brand Spreadable Cast Alloy
Nodir Turakhodjaev , Tashkent State Technical University, Tashkent, Uzbekistan Nosir Saidmakhamadov , Tashkent State Technical University, Tashkent, Uzbekistan Fatkhulla Abdullaev , Tashkent State Technical University, Tashkent, Uzbekistan Shirinkhon Turakhujaeva , Turin Polytechnic University In Tashkent, Tashkent, Uzbekistan Zafar Bobodustov , Navoi Machine-Building Plant, Navoi Region, Uzbekistan Ulugbek Rakhmanov , Navoi Machine-Building Plant, Navoi Region, Uzbekistan Furkhat Odilov , Tashkent State Technical University, Tashkent, UzbekistanAbstract
This article a new brand 280X29NL (sample 1) alloy, which is economically inexpensive and corrosive, was developed without changing the chemical composition of high-chromium 280X29NL cast iron and reducing the mechanical properties of the alloy.
Keywords
Alloy, chrome, ductile, microstructure, carbide, IST - 0, 4 induction furnace, SNOL - 7,2 / 1100 muffle furnace, , hardness measuring device TK-2M
References
Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.
Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.
Wang Y. et al. Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature //Materials Science and Engineering: A. – 2020. – Т. 787. – С. 139494.
Wang Y. et al. High-strength, ductility and modulus Al–Li/B4C composite with near nanostructure produced by accumulative roll bonding //Journal of Alloys and Compounds. – 2020. – Т. 834. – С. 155105.
Wang Y. et al. Concurrently improving uniform elongation and strength of ultrafine-grained Al–2Li alloy //Materials Science and Engineering: A. – 2020. – Т. 792. – С. 139848.
Wang Y. et al. Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy //Journal of Materials Research. – 2021. – С. 1-11.
Turakhodjaev N. et al. Analysis of technological solutions for reducing the copper concentration in slags from oxygen-flare smelting of copper sulfide concentrates //Journal of Critical Reviews. – 2020. – Т. 7. – №. 5. – С. 449-452.
Bekmirzaev S., Saidmakhamadov N., Ubaydullaev М. Obtaining sand-clay casting". Theory and practice of modern //Russia. – 2016. – №. 4 (12). – С. 112.
Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.
Бекмирзаев Ш., Саидмахамадов Н., Убайдуллаев М. ПОЛУЧЕНИЯ ЛИТЬЕ В ПЕСЧАНО-ГЛИНИСТЫЕ МЕТОДОМ //Теория и практика современной науки. – 2016. – №. 6-1. – С. 112-115.
Саидмахамадов Н. и др. ОБЩАЯ ТЕХНОЛОГИЯ ПРОИЗВОДСТВА ПОРОШКОВО КОНСТУКЦИОННЫХ МАТЕРИАЛОВ //Экономика и социум. – 2019. – №. 4. – С. 673-680.
Саидмахамадов Н. и др. ТЕХНОЛОГИЯ ПРЕДОТВРАШЕНИЯ ПОР В ОТЛИВАХ //Экономика и социум. – 2019. – №. 4. – С. 661-672.
Саидмахамадов Н., Хайдаров У., Эгамбердиев Б. УЛУЧШЕНИЕ ПОДГОТОВКИ ТЕХНОЛОГИЙ МЕТОДОМ СПЕЦИАЛЬНОГО СЛИВАНИЯ //Экономика и социум. – 2019. – №. 4. – С. 651-660.
Turakhodjaev, N., Turakhujaeva, S., Turakhodjaev, S., Tursunbaev, S., Turakhodjaeva, F., & Turakhujaeva, A. (2020). Research On Heat Exchange In Melting Process. Solid State Technology, 63(6), 6653-6661.
Nodir, T., Sherzod, T., Ruslan, Z., Sarvar, T., & Azamat, B. (2020). STUDYING THE SCIENTIFIC AND TECHNOLOGICAL BASES FOR THE PROCESSING OF DUMPING COPPER AND ALUMINUM SLAGS. Journal of Critical Reviews, 7(11), 441-444.
Турсунбаев, С. А. (2019). Особенности обработки деталей из магнитотвердых материалов. In ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ (pp. 23-27).
Тураходжаев, Н. Д., Турсунбаев, С. А., Одилов, Ф. У., Зокиров, Р. С., & Кучкарова, М. Х. (2020). Влияние условий легирования на свойства белых чугунов. In Техника и технологии машиностроения (pp. 63-68).
Ташбулатов, Ш. Б., Турсунбаев, С. А., & Чоршанбиев, Ш. М. (2018). Влияние различных примесей и добавок на свойства меди. In ТЕХНИКА И ТЕХНОЛОГИИ МАШИНОСТРОЕНИЯ (pp. 25-28).
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.