Articles
| Open Access |
DOI: Study Of The Influence Of Light Weather On The Mechanical Properties Of Para-Aramid Filaments
S. J. Razzakov , Doctor Of Technical Sciences, Professor, Namangan Civil Engineering Institute, Namangan, Uzbekistan B. K. Rakhmanov , PhD, Fergana Polytechnic Institute, Fergana, Uzbekistan J.D. Akhmedov , Candidate Of Technical Sciences, Associate Professor, Fergana Polytechnic Institute, Fergana, UzbekistanAbstract
The article presents the prospects for the growth of construction volumes in the Republic of Uzbekistan, as a consequence of the need for load-handling devices (LHD) made of synthetic woven belts and ropes (STLK). The results of experimental work are presented, where the wear of textile materials after exposure to light weather is characterized by a change in mechanical properties, which affects the reliability of products during operation.
Keywords
Technology of construction processes, lifting and transport equipment, lifting device, rigging
References
Suleymanova, L. A., Raxmanov, B. K., Kocherjenko, V. V., & Solodov, N. V. (2018). Perspektivnye napravlenija razvitija tehnologii takelazhnyh rabot s ispol'zovaniem stropov na tekstil'noj osnove. [Perspective directions of development of the technology of rigging with the use of slings on a textile basis.]. Bulletin of the Belgorod State Technological University named after VG Shukhov, (7). (in Russian)
Rakhmanov, B. K., & Abdullaev, I. N. (2018). Problemy proizvodstva i primeneniya gruzozakhvatnykh prisposoblenii iz sinteticheskikh lent i kanatov v Uzbekistane. [Problems of production and use of load-gripping devices made of synthetic belts and ropes in Uzbekistan]. Pod"emno-transportnoe delo, (6), 5-7. (in Russian)
Yunusaliev E.M., Abdullaev I.N., Akhmedov Zh.D., Rakhmanov B.K. "Innovatsii v stroitel'noi tekhnologii: proizvodstvo i primenenie v Uzbekistane strop iz tekstil'nykh lent i kombinirovannykh kanatov". [Innovations in construction technology: production and use in Uzbekistan of slings from textile belts and combined ropes.] Energo-resursosberegayushchie tekhnologii i oborudovanie v dorozhnoi i stroitel'noi otraslyakh. 2020. (in Russian)
Юнусалиев, Э. М., Абдуллаев, И. Н., Ахмедов, Ж. Д., & Рахманов, Б. К. (2020). Инновации в строительной технологии: производство и применение в узбекистане строп из текстильных лент и комбинированных канатов. In Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях (pp. 421-431).
Shustov Yu.S., Kurdenkova A.B., Antonova O.N., Nikitina O.V. Investigations of the influence of light weather on the mechanical properties of para-aramid threads // 2007. No. 2. P.26.
GOST 6611.2-73. Textile threads. Methods for determining breaking load and elongation at break.
Юнусалиев, Э. М., Абдуллаев, И. Н., Рахманов, Б. К., & Алаханов, З. М. (2020). Составные компоненты деформирования и разрушения синтетических тканых лент для грузозахватных приспособлений в строительстве. In Энерго-ресурсосберегающие технологии и оборудование в дорожной и строительной отраслях (pp. 431-438).
Абдуллаев, И. Н., & Рахманов, Б. К. (2019). Распределение монтажных элементов зданий по массе для подбора грузозахватных синтетических строп в строительстве. In Наука и инновации в строительстве (pp. 188-192).
Сулейманова, Л. А., Кочерженко, В. В., Солодов, Н. В., & Рахманов, Б. К. (2018). Перспективные направления процессов с использованием при реконструкции, ремонте. Развития технологии такелажных текстильных стропов и устранении завалов. Строительство: новые технологии-новое оборудование, (12), 68-76.
Рахманов, Б. К., & Алиматов, Б. А. (2018). Специальные строповочные устройства. In Наука и инновации в строительстве (pp. 264-267).
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.