Articles
| Open Access |
DOI: TECHNOLOGIES FOR PROCESSING WORKING PARTS OF DIES USED IN COLD VOLUME STAMPING
Ergashev Dilshodbek Маmаsidiqоvich , Phd. Andijan Machine-Building Institute, Andijan, UzbekistanAbstract
This paper presents an analysis of the technical requirements for cold stamping, wear of their working zones, factors affecting wear and ways to increase wear resistance.
Keywords
Cold stamping, bending, tool steels
References
Abdujalol, B., Nodir, T., Fakhriddin, M., Nuriddin, T., Kamola, T., & Nargiza, S. (2022). Development of steel wheel detail casting technology. Asian Journal of Multidimensional Research, 11(8), 82-88.
Alon Mishra, Joydeep Maity. Structure – property correlation of AlSi 1080 steel subjected to cyclic quenching treatment // Materials Science Engineering A. – 646. – 2015. – Р. 169-181.
Гурьев A.M., Земляков С.А. Новая высокоэффективная технология термического упрочнения режущего и штампового инструмента. В сб. трудов научно-технической конференции 5-7 апреля 2000 г.- Барнаул: Изд-во АлтГТУ, 2000.- С.25-27.
Марочник сталей и сплавов. М. М. Колосков, Е.Т. Долбенко, Ю.В. Каширский и др. Под ред. А. С. Зубченко – М.: Машиностроение, 2001.- 672 С.
Фирсова Н. В. Разработка оптимального легирующего комплекса и режимов термического упрочнения штамповых сталей. Дисс. на соиск. уч. степ, к.т.н. / Н.В. Фирсова. -Оренбург, 2011. - 17 с.
Norkhudjayev, F. R., Mukhamedov, A. A., Khudayberdiev, O. R., Ergashev, D. M., & Norkhudjayeva, R. F. (2020). Development of Machine-Building Materials and Details of Machines from the Powders received from Waste of Raw Materials in the Industry of Uzbekistan. Test Engineering and Management, 83(5-6), 639-646.
Norkhudjayev, F. R., Mukhamedov, A. A., Djalolova, S. T., Ergashev, D. M., & Hudayberdiyev, O. R. (2020). Technological capabilities of application of thermocyclic processing (Tcp) tool steel. International Journal of Psychosocial Rehabilitation, 24(8), 1866-1874.
Норхуджаев, Ф. Р., Мухамедов, А. А., Эргашев, Д. М., Норхужаева, Р. Ф., & Тешабоев, А. М. (2021). Влияние режимов термоциклическая обработка на структурообразование инструменталъных сталях. Композиционные материалы, 1, 75-77.
Норхуджаев, Ф. Р., Эргашев, Д. М., & Тешабоев, А. М. (2021). Упрочненение режущих сегментов аппаратов уборочных машин. Композиционные материалы, 2, 92
Ataxonova, S. Q., & Mo’Ydinova, D. R. (2022). METALL QOTISHMALARINING MARKALANISHI TAHLILI. Oriental renaissance: Innovative, educational, natural and social sciences, 2(3), 312-326.
Ataxonova, S. Q., & Murodjon o'g, S. U. B. (2022). Analysis Of Magnetic Materilas. Texas Journal of Multidisciplinary Studies, 6, 23-26.
Ataxonova, S. Q. (2021). METALLARNI SIFAT NAZORATINI TEKSHIRISH USULLARINI TAHLIL QILISH JARAYONLARINI TAKOMILLASHTIRISH. Oriental INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCHERS www.wordlyknowledge.uz Volume: 2, Issue: 1, 2023 157 renaissance: Innovative, educational, natural and social sciences, 1(10), 124-135.
Jalilov Rakhimjon Ravshanbek o’g’li. "CLADDING TILE PRODUCTION USING MAGNESIUM OXYCHLORIDE CEMENT MORTAR IMPROVED BY DIFFERENT WASTES." Gospodarka i Innowacje. 35 (2023): 276-278.
Jalilov Rahimjon Ravshanbek o’g’li. "Study of Morphology and Dimensions of Ultra-Dispersed Powders of Tungsten." American Journal of Social and Humanitarian Research 3.5 (2022): 20-22.
Article Statistics
Copyright License
Copyright (c) 2023 Ergashev Dilshodbek Маmаsidiqоvich
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.