Articles | Open Access | DOI: https://doi.org/10.37547/tajet/Volume05Issue10-03

INCREASING THE EFFICIENCY OF SAW GINNING TECHNOLOGY

Kamola Ortikova , Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Akmal Umarov , Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Maftuna Inamova , Namangan Institute of Engineering and Technology, Namangan, Uzbekistan

Abstract

In the process of separating the fiber from the seed, the speed of the seed roll in the roll box of the saw gin varies depending on the diameter of the saw. As the blade diameter decreases, the peripheral speed does not change, but the linear speed does. This leads to a deterioration in the quality of the fiber and seed, and a decrease in the productivity of the machine. For this reason, the regulation of the linear speed of the saw is one of the important problems in the ginning process. To do this, the speed of rotation of the saw cylinder is changed following the change in the diameter of the saw. Thus, the speed of the seed roll is regulated.

Keywords

Seed, fiber, dirt

References

Decree of the President of the Republic of Uzbekistan "On the Strategy of Actions for the Further Development of the Republic of Uzbekistan" dated February 7, 2017, under No. UP-4947. https://lex.uz/docs/3107036

Akmal Umarov, Kamola Ortikova, Akramjon Sarimsakov Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Engineering, 12, 715-722 https://www.scirp.org/journal/paperinformation.aspx?paperid=103378

Umarov A.A. Ortikova K.I. Sarimsakov A.U. Kurbanov D. Analysis of the control of manual and automatic regulation of the saw gin feed rollers. Scientific journal" Universum: technical sciences". Part 2. Moscow, 2020.-9 (78). 22-26, https://7universum.com/ru/tech/archive/item/10693

Axmedxodjayev Кh.T., Ortiqova K., Umarov А. Investigation of the Ginning Process on ДП Series Saw Gin Stands // Scientific Research Publishing, Engineering, 2019, 11, 523-530. https://www.scirp.org/html/6-8103257_94702.htm

Umarov, A., Kurbanov, D., Kenjayeva, M., and Mardonov, B. (2021) Modeling the Process of Transportation of Seed Cotton through the Parameters of the Food Zone. Engineering, 13, 493-501. https://doi.org/10.4236/eng.2021.139035

Akmal, U., Khamit, A., Akramjon, S. and Muazzam, K. (2018) The Saw Gin Stand with Adjustable Movement of the Roll Box. Engineering,10, 486-494. https://doi.org/10.4236/eng.2018.108034

Umarov, A., Ortikova, K., and Sarimsakov, A. (2020) Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Engineering, 12, 715-722. https://doi.org/10.4236/eng.2020.1210050

A.Sarimsakov, R.Muradov, B.Mardonov. Modeling Of the Process of Interaction of the Saw Cylinder with the Raw Material In The Process Of Ginning // TEST Engineering and Management (Scopus) May-June 2020 ISSN: 0193-4120 Page No. 27386– 27391 http://testmagzine.biz/index.php/testmagzine/article/view/12709

Sarimsakov, A. U., Ahmedov, B., & Abdullajanov, B. (2020). To Study Circling Of The Seed Roller At Ginning Process With Practical Method. The American Journal of Engineering and Technology, 2(11), 142-148. https://doi.org/10.37547/tajet/Volume02Issue11-22

Sarimsakov, A. U., Ergashev, J. F. (2020). Modeling The Motion Of A Mixture With Weighty Particles In A Stationary Flow Of Liquid. SAARJ Journal on Banking & Insurance Research (SJBIR), 9(6), 20-24. https://doi:10.5958/2319-1422.2020.00035.1

Sarimsakov, A. "Modeling the Process of Interaction of a Moving Mass of Raw Cotton with a Rotating Saw Cylinder" Journal of “Problems of Mechanics 2 (2014): 122-125.

Komilov, Shuhratjon Rahimjon o’g’li; Mamadaliev, Nodirbek Vali o’g’li; Sarimsakov, Akramjon Usmanovich; and Muradov, Rustam Muradovich (2021) "ANALYSIS OF THE WORKS OF THE PERFORMED SCIENTIFIC RESEARCH ON THE IMPROVEMENT OF THE SAW JEAN DESIGN," Scientific Bulletin of Namangan State University: Vol. 2: Iss. 2, Article 27. Available at: https://uzjournals.edu.uz/namdu/vol2/iss2/27

A.U.Sarimsakov, K.I.Ortikova, R.Muradov. (2020). Influence of Seed Roll Speed on Gin Machine Efficiency // technical.tadqiqot.uz, 4(3), 36-43. http://dx.doi.org/10.26739/2181-9696-2020-4-7

Sarimsakov, K. Ortikova, R. Muradov. (2020). THE EFFECT OF THE SPEED OF THE SEED ROLLER ON THE EFFICIENCY OF THE GIN MACHINE // technical.tadqiqot.uz, 4(3), 36-43. http://dx.doi.org/10.26739/2181-9696-2020-4-7

.Olimjon Garilakov, Bahadir Obilov, Shahboz Isayev, Ibrahim Muhsinov, Maftuna Inamova Theoretical study of the process of contaminants from raw

cotton moving on the surface of the grate “Problems in teha textile and light industry in the context of integration of science and industry and ways to solve them”(PTLICISIWS-2022) International conference PTLICISIWS-2022.Scopus webof science indexed.

. Inamova Maftuna Dedamirza daughter, Isaev Shakhboz Shavkatjonovich, Mukhsinov Ibrokhim Ismailzhan son “analysis of cotton seeds in laboratory conditions” scientific and methodological Journal of interpretation and research uif-2023 in all areas:8.2 | № 21 15.04.2023 talqinvatadqiqotlar.uz

.M.A.Tajibayev., M.Inamova., S.T.Rejabboyev analysis of cotton crop quality indicators in laboratory conditions Namangan Institute of Engineering Technology Academic Innovation Foundation "modern concept of ensuring the quality of cotton, textile and Light Industry Products" International Scientific and practical conference, 2020. №1.B. 197-199. nammti_ilmiy@bk.ru

4. Isaev Shakhboz Shavkatjonovich, daughter of Inamova Maftuna Dedamirza, Azimov Nuriddin Usmanjonovich “classification of fractions in a seed sorting device” collection of materials of the 7th Republican scientific conference on the topic of problems of Science in the interpretation of young studies March 30, Part 1 of 2023.

5. M. Inamova, S. Rezhabboev scientific-technical Journal of the Fergana poitechnical Institute of laboratory analysis in the infraxan device of seeds passed through the processes of demining Scientific-technical journal (STJ FerPI, , 22, T.26, . . )

Article Statistics

Copyright License

Download Citations

How to Cite

Kamola Ortikova, Akmal Umarov, & Maftuna Inamova. (2023). INCREASING THE EFFICIENCY OF SAW GINNING TECHNOLOGY. The American Journal of Engineering and Technology, 5(10), 12–27. https://doi.org/10.37547/tajet/Volume05Issue10-03