UTILIZATION OF EUCALYPTUS BARK FOR SYNTHESIS OF HIGH SURFACE AREA ACTIVATED CARBON: A SUSTAINABLE APPROACH FOR METHYLENE BLUE REMOVAL
Shailesh Kumar Dhakatea , Academy Of Scientific And Innovative Research (Acsir), Ghaziabad, Uttar Pradesh, IndiaAbstract
The present study investigates the potential utilization of eucalyptus bark, an abundantly available agricultural waste, as a precursor for the synthesis of high surface area activated carbon. The activated carbon material is synthesized through a carbonization and activation process, followed by subsequent characterization using various analytical techniques. The synthesized activated carbon is evaluated for its effectiveness in removing methylene blue, a widely used textile dye and environmental pollutant. Batch adsorption experiments are conducted to assess the adsorption capacity and kinetics of methylene blue onto the eucalyptus bark-derived activated carbon. The results demonstrate the remarkable adsorption performance of the synthesized material, indicating its potential as a sustainable and cost-effective adsorbent for the removal of methylene blue from aqueous solutions.
Keywords
Eucalyptus bark, activated carbon, synthesis
References
Yu M, Li J & Wang L,Chem Eng J, 310 (2017) 300.
Miguel G S, Fowler G D, Dall'Orso M & Sollars C J, J Chem Technol Biotechnol, 77 (1) (2002) .
Tamai H, Yoshida T, Sasaki M & Yasuda H, Carbon, 37 (6 (1999) 983.
Yorgun S, Yıldız D, J Taiwan Inst Chem Eng, 53 (2015) 122.
Corcho-Corral B, Olivares-Marín M, Fernández-González C, Gómez-Serrano V & Macías-García A, Appl Surf Sci, 252 (17) (2006) 5961.
Danish M, Hashim R, Ibrahim M M & Sulaiman O, Wood Sci Technol, 48 (5) (2014) 1069.
Qin C, Chen Y & Gao J-M, Mater Lett, 135 (2014) 123.
Turmuzi M, Daud W R W, Tasirin S M, Takriff M S & Iyuke S, Carbon, 42 (2) (2004) 453.
Sych N, Trofymenko S, Poddubnaya O, Tsyba M, Sapsay V, Klymchuk D & Puziy A, Appl Surf Sci, 261 (2012) 75.
Azevedo D C, Araujo J C S, Bastos-Neto M, Torres A E B, Jaguaribe E F & Cavalcante C L, Microporous Mesoporous Mater, 100 (1-3) (2007) 361.
Article Statistics
Copyright License
Copyright (c) 2023 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.