Articles
| Open Access |
DOI: DEVELOPMENT OF A NEW DESIGN OF CUTTING ELEMENTS FOR QUARRY EXCAVATOR BUCKETS AND RESULTS OF ITS EXPERIMENTAL RESEARCH
Galiya Yeleubaevna Raykhanova , Republic of Uzbekistan, Tashkent region, Almalyk, Totuvlik str. 9-31, Uzbekistan Rustam Umarhanovich Djuraev , Republic of Uzbekistan, Navoi region, Navoi, Spitamen str., 8 - 21, Uzbekistan Sardorjon Abdumuminovich Turdiyev , Republic of Uzbekistan, Navoi region, Karmana, Bahor str., 39, UzbekistanAbstract
An analysis of the performance of excavators shows that many hydraulic excavators used in mining companies operate at a lower efficiency than those specified in the technical description. This can be caused by unforeseen downtime, rapid failure of parts and unreliable operation of excavator workers.
This paper discusses the development of cutting elements with high service life to increase the efficiency of quarry excavators. In addition, the results of experiments on the proposed improved denture teeth and their analysis are presented.
Keywords
Quarry, excavator, bucket, tooth, protective element
References
Gavrishev S. E. Rationale of organizational and technological methods for increasing the reliability and efficiency of open-pit mines: Ph: - Magnitogorsk, 2002. - 294 pt.
Poderny R.Y. Analysis of the current state of the quarry machinery market in the world // M.: Mining Industry, 2013. - №4 (110).
Turdiyev S.A and Jurayev A.Sh 2022. Study of the effect of excavator bucket tooth abrasion on digging resistance. Academic Research in Education Sciences. 3(3), pp. 105-110.
Abduazizov N.A., Mahmudov Sh.A., Turdiyev S.A. A study on the theory of the work of the working elements of hydraulic quarry excavators. Bukhara Engineering Technologists University. Discipline and technology development of a scientific and technical journal. 2021 il 3rd p.4-11.
Turdiyev S.A., Djurayev R.U., Jo`rayev A.Sh. Experimental and test study of the effectiveness of the improved design of the excavator bucket jaw plate // Central asian research journal for interdisciplinary studies (CARJIS) – Uzbekistan, 2022. – Volume 2, Issue 3. P. 214-223.
Turdiyev S.A., Djurayev R.U. Experimental results on the effectiveness of an improved excavator bucket tooth design // The American Journal of Engineering and Technology – America, 2022. – Volume 4, Issue 3. P 1-13.
Djuraev R.U., Turdiyev S.A. Mathematical modeling of the wear of cutting elements on quarry excavators // International journal of advanced research in science, engineering and technology (IJARSET) – India, 2022. – Volume 9, Issue 3. – P. 19074-19080.
Article Statistics
Copyright License
Copyright (c) 2022 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.