Articles
| Open Access |
DOI: An Effective Cleaner of Raw Cotton from Fine Trash Particles
Usmanov Jasur Aminjanovich , Candidate Of Technical Sciences, Associate Professor, Department Of "Descriptive Geometry And Engineering Graphics", Ferghana Polytechnic Institute, Ferghana, Uzbekistan Abdullaev Shukhrat Akhmadjonovic , Senior Lecturer Of The Department "Applied Mechanics", Ferghana Polytechnic Institute, Ferghana, Uzbekistan Rustamova Mukhlisa Mukhtoralievna , Assistant Of The Department "Descriptive Geometry And Engineering Graphics" Ferghana Polytechnic Institute, Ferghana, UzbekistanAbstract
The article under discussion depicts a study on the effective cleaner of raw cotton from fine trash particles. The purpose of the study is not only to obtain specific information about the raw cotton cleaning process for the selected processing combination but also to obtain some generalization about the desiccation circuit. The authors of the article consider that proposed in the research CCD-10M cleaner allows to achieve high cleaning effect with little damage to the seeds.
Keywords
Cotton, methods of cleaning, operating principles, trash impurities, reel-plate, reel height, radius, frequency of reel rotation, canopy, drum
References
Khusanbaev A.M., Kholmurzaev A.A., Umarova M.O. (2020). Reconversion of the circle arc directly and determination of its natural length. EC-01-0022504. Academia. An International Multidisciplinary Research Journal.
Khusanbaev A.M., Umarova M.O., Abdullaeva D.T. (2020). The rectification of curve flat arch Academia. An International Multidisciplinary Research Journal 10 (5).
Arziyev S.S., Rustamova M.M. (2020). The modelling method in the integration of design and engineering graphics disciplines. Theoretical and applied science, Issue. Volume. 86.
Mamajonovich, K. A., Eraliyevna, T. Z., & Mukhtaraliyevna, R. M. (2020). Box curve (curl) of fan casing. Academicia: An International Multidisciplinary Research Journal, 10(5), 604-607.
Khusanbaev A.M., Abdullaeva D.T., Rustamova M.M. (2021). Dividing an arbitrary obtuse angle into three and six equal parts. EPRA International Journal of Research and Development (IJRD), Volume: 6. Issue: 1. January.
Rustamova, M. M., Oxunjonov, Z. N., & Madaminov, J. Z. (2020). Use of graphics computer software in the study of the subject" Drawing and engineering graphics". ACADEMICIA: An International Multidisciplinary. Research Journal, 10(5), 83.
Usmanov, D. A., Umarova, M. O., Abdullaeva, D. T., & Botirov, A. A. U. (2019). Issledovanie jeffektivnosti ochistki hlopka-syrca ot melkih sornyh primesej [Investigation of the efficiency of cleaning raw cotton from small trash impurities]. Problemy sovremennoj nauki i obrazovanija, (11-1 (144)). (in Russian).
Usmanov, D. A., Karimov, R. H., & Polotov, K. K. (2019). Tehnologicheskaja ocenka raboty chetyrehbarabannogo ochistitelja [Technological assessment of the work of a four-drum cleaner]. Problemy sovremennoj nauki i obrazovanija, (11-1 (144)). (in Russian).
Usmanov, D. A., Umarova, M. O., & Abdullaeva, D. T. (2019). Ochistka hlopka-syrca ot melkih sornyh primesej [Cleaning of raw cotton from small trash impurities]. Problemy sovremennoj nauki i obrazovanija, (10 (143)). (in Russian).
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.