Articles
| Open Access |
DOI: On Determining The Conditions For Effective Operation Of The Vacuum Valve Of Cotton Separators
Akramjanov Dilmurod Muxtor o’g’li , Assistant, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan Boltabayev Bekzod Egamberdiyevich , Assistant, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan Khusanov Sadi Makhamatjonovich, , Base doctoral student, Namangan institute of engineering and technology, Uzbekistan, Namangan Muradov Rustam Muradovich , Doctor of Sciences, Namangan institute of engineering and technology, Uzbekistan, NamanganAbstract
The article analyzes the efficiency results for the improvement and production of the
separator device of the vacuum valve of the separator, the dependence of the number of
revolutions of the network drum on changes in cotton pollution and the dependence
Keywords
nozzle, mesh surface
References
M.T. Khojiev, I.Z. Abbasov, B.M. Mardonov, “Theoretical study of the motion of dust
particles in the chamber of the collector”, Journal of Textile Problems. - Tashkent: TITLI,
, № 2, 75-79 p.
A. Maxkamov, A. Karimov, “Laws of change of dynamic compressive forces acting on
cotton pieces in the separator working chamber”, Journal of Textile Problems. - Tashkent:
TITLI, 2013, № 1, 27-29 p.
A. Karimov, A. Maxkamov, B. Mardonov, “Theoretical studies of the movement process
of cotton wool in a vacuum valve with a deflection profile”, Journal of Textile Problems. -
Tashkent: TITLI, 2012, № 4, 8-12 p.
Mardonov B., Makhkamov A., Karimov A. Theoretical studies of the process of movement
of cotton pieces in a vacuum valve with a deflection profile. // Textile problems. 1 Vol. –
Tashkent, 2012. – pp. 8-12.
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.