Articles
| Open Access |
DOI: Study Of Dynamics Of The Twisting Process In Pneumomechanical Spinning In The Presence Of
Abduvakhidov Mubashirkhon, , Candidate of Technical Sciences., Prof., Namangan Engineering and Technological Institute, Uzbekistan, Namangan city Muradov Akramjon Abdusatorovich, , Candidate of Technical Sciences., Associate Professor, Namangan Engineering and Technological Institute, Uzbekistan, Namangan Sayidmuradov Mirzokhid Mirzarahimovich , Senior lecturer, Department of Process Machines and Equipment, Namangan Engineering and Technology Institute, Uzbekistan, Namangan cityAbstract
For the modern textile industry, one of the characteristic trends remains the desire to
increase the productivity of technological machines by increasing speed, which sets the task
of reducing the cost of electricity in pneumatic mechanical spinning, the successful solution
of which requires systematizing the accumulated information on new methods of shaping
yarn and structures of shaping and twisting devices to clarify a number of problems in the
development of the yarn forming method.
Keywords
: Pneumomechanical spinning (rotor spinning), yarn
References
Pavlov Yu.V. Stationary finches in spinning.-М.: - Light Industry, 1973.
Spinnen von drehungsrreduzierten Rotorgarnen unter-Einsatz eines
Falschdrahtaggregats - Textil Praxis, 1975, 5. - c.532-533.
H. Aminirastabi et al., “Evaluation of nano grain growth of TiO2 fibers fabricated via
centrifugal jet spinning,” Nano-Structures and Nano-Objects, vol. 21, Feb. 2020, doi:
1016/j.nanoso.2019.100413.
X. Zhang et al., “Preparation and performance of novel polyvinylpyrrolidone/polyethylene
glycol phase change materials composite fibers by centrifugal spinning,” Chem. Phys. Lett
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.