Articles
| Open Access |
DOI: Theoretical Study Of The Movement Of New Impurities And Heavy Impurities
Fayzullo Rakhimov , Master,Namangan Engineering-Technological Institute, Uzbekistan Khusanboy Kasymov , Researcher, Namangan EngineeringTechnological Institute, Uzbekistan Abdusamat Karimov , Associate Professor,Namangan EngineeringTechnological Institute, Uzbekis Rustam Muradov , Professor Namangan EngineeringTechnological Institute, UzbekistanAbstract
In the paper the new scaffolding scheme for effective separation of heavy impurities in the
raw material of the raw material is presented and the working principle is presented.
Differential equations of movement of heavy mixtures are made and corresponding graphs
are obtained
Keywords
cotton, pipe
References
. Decree of the President of the Republic of Uzbekistan dated February 7, 2017 N UP4947 "On the strategy of further development of the Republic of Uzbekistan".
.R. Muradov, A. Karimov, E. Tadaeva. Theoretical study of mechanical (shock) release
of large and small impurities in the raw cotton raw material // Fergana ScientificTechnical Journal, ITP-2015.
Maxametov T.D. Optional processors, customization modes, and optimization of the
optical form. Dissertation Candidate Technicchnical Nauk - Tashkent, 1972.
R. Muradov, S.. Husanov. Karimov "Ways to increase the efficiency of devices for
trapping heavy elements in cotton" monograph "Namangan", 2017. p.
R. Muradov, S. Khusanov "Improving its efficiency by improving the impregnating
elements" Bulletin of NamSU. 2015
E.Z. Zikriyoev «Primary cotton processing» Textbook. Tashkent, "Mehnat" 2002
FBOmonov "Inventor of cotton processing", Tashkent, "Voris" Publishing Company,
GJ Jabbarov and others. "Technology of primary cotton processing", Tashkent,
"Teacher", 1987.
Khmyrov V.D. Разработка сайтов и регистрации для естоществления: AutoForest.
Dis… cand. technician nauk. Tashkent: TITLP, 1987. - 22 p.
Belyaev R.F. Очиститель-regenerator xlopka-syrtsa // Khlopkovaya promyshlennost.
No. 3. S.13-14
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.