Articles
| Open Access |
DOI: The Importance Of The Extension Tool In Reducing The Inequality Of Yarn
Sanobar Atoevna Khamraeva , Doctor Of Technical Sciences, Professor, Department Of “Textile Fabric Technology”, Tashkent Institute Of Textile And Light Industry, Uzbekistan Nodira Bakhtiyarovna Yusupova , Assistant,Department Of “Textile Fabric Technology”, Tashkent Institute Of Textile And Light Industry, Uzbekistan Dilmukhammad Davronbek Ogli Atambaev , Assistant, Department Of “Metrology, Standardization And Quality Management”, Namangan Institute Of Engineering Technology, Uzbekistan Muhriddin Hakimjon Ogli Hasanov , Master Student, Metrology, Standardization And Quality Management (Textile And Light Industry), Namangan Institute Of Engineering Technology, UzbekistanAbstract
In the spinning process, spinning machines have improved the stretching tool, reducing their
unevenness by straightening and parallelism of fiber ends, reducing the number of yarn breaks in the
production of quality textile and knitted fabrics, a sharp increase in labor productivity, reducing
production costs, other economic indicators.
Keywords
Yarn,, roughness,
References
Decree of the President of the Republic of
Uzbekistan No. PD-5285 "On measures to
accelerate the development of the textile
and knitwear industry." Tashkent.
December 14, 2017.
Stretching tool of the spinning machine.
Patent for utility model of the State Patent
Office of the Republic of Uzbekistan. FAP
0156. 2018.
Yang Jing, Xu Bojun Xie, Chunping Liu,
Xinjin, Comparison of fibre migration in
different yarn bodies/ Fibre end Textile
Indian (IJFTR), Dec 2018.
Tyagi G. K., Bhowmick Manik,
Bhattacharyya S., Kumar R., Effect of
spinning conditions on mechanical and
performance characteristics of cotton
ring- and compact-spun yarns/ IJFTR Vol.35
(1) [March 2010]. – pp. 21-30.
Müller H., Maidel H. (1997) Abhdgigkeit
der Rotorgarneigenschaften von der
mechanischen Beanspruchung der
Baumwolle beim Kardieren und
Rotorspinnen/ Melliand Textilber. –78,
№1,2. – p. 35.
Cyniak Danuta, Juzon Boguslaw. (1998)
Investigation of the properties of yarn
obtained on rotor spinning machines of
different models. RS. Textile industry, No.
– p. 12.
Standards for testing yarns and fabrics.
M., 1992-2012.
M.I. Bat and others. (1968) "Theoretical
Mechanics", Nauka. – Moscow. – p. 625
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.