Articles
| Open Access |
DOI: A Practical Method For Calculating Cylindrical Shells
Davlyatov Sh.M , Senior Lecturer, The Department Of Construction Of Buildings And Structures, Ferghana Polytechnic Institute, Ferghana, Uzbekistan Egamberdiyev B.O , Assistant, The Department Of Construction Of Buildings And Structures, Ferghana Polytechnic Institute, Ferghana, UzbekistanAbstract
This article outlines the main provisions of the proposed method of determining the stress-strain state
of cylindrical shells. The method can be used to calculate the various sheet structures, such as
rectangular and cylindrical steel tanks for the storage of fluid substances.
Keywords
Stress-strain state,, , strength
References
Akhrarovich, A. K., & Muradovich, D. S.
(2016). Calculation of cylindrical shells of
tower type, reinforced along the generatrix
by circular panels. European science review,
(3-4).
Egorov, E. A., & Fedoryaka, Yu. V. (2006).
Issledovanie voprosov ustoichivosti
stal'nykh vertikal'nykh tsilindricheskikh
rezervuarov. Metallicheskie konstruktsii,
(3), 89-97.
Muratovich, D. S. (2016). Study of the
functioning of reservoirs in the form of
cylindrical shells. European science review,
(9-10).
Akramov, Kh. A., Davlyatov, Sh. M., &
Khazratkulov, U. U. (2016). Metody rascheta
obshchei ustoichivosti tsilindricheskikh
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.