Articles
| Open Access |
DOI: The Study Of The Fineness Of Textile Materials In Small Manufacturing Enterprises
Mirjamol Mirkarimovich Mirkhojaev , Doctor Of Philosophy In Technical Sciences (Phd), Department Of “Metrology, Standardization And Quality Management”, Namangan Institute Of Engineering Technology, Uzbekistan Orifkhon Fozilkhon Ogli Iskandarov , 2nd Course Master Student, Specialty Of “Construction And Design Of Light Industry Joints”, Namangan Institute Of Engineering Technology, UzbekistanAbstract
The article is devoted to testштп the hardness of textile materials. To analyze and study samples were taken from various tissues of the linear density of the yarn and also with different type of fabric weave and density. To study the rigidity of textile materials the appliance is made and certain hardness of the test samples. On based of the results of the samples and methods for determining the stiffness can be concluded that stiffness is one of the basic properties of textile materials for garment production.
Keywords
Stretching, bending, crushing, friction forces, Jacquard, Gauze indicators, sewing, and fabric quality indicators
References
EP Maltseva “Tikuvchilik materialshunosligi” Toshkent “Kituvchi” 1986 y. (E.P. Maltseva. (1986) "Sewing Materials Science" - Tashkent. "Teacher")
Bukaev P.T. and etc. "Cotton weaving": Handbook. M Legprombitizdat, 1987 (Bukaev P.T. and others. (1987) “Cotton weaving”: Handbook. - Moscow. Legprombitizdat)
"Fabrics Technical Methods for Determination of Flexural Stiffness" GOST 29104.21-91)
Mirkhozhaev M.M., Kosimov A.A., Alieva D.G., Khasanova Sh. Gazlama Kattiқligining Uning Sifatiga Tasiri. FarPI ilmiy technician magazines mahsus sleep, 2016 –B-164-167. (Mirxojaev M.M., Qosimov A.A., Alieva D.G., Khasanova Sh. (2016) The effect of fabric stiffness on its quality. Special issue of FarPI scientific and technical journal. - pp. 164-167.)
Mirjamol Mirkarimovich Mirxojayev, Jamshid Fakhriddin ogli Ergashev, Analysis Of Tanda Yarn Fiber Quality Indicators In Cotton Yarn Hardened Fabric Production, The American Journal of Engineering And TechnologyThe USA Journals Volume 02 Issue 09-2020, Published: September 28, 2020 | Pages: 82-85.
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.