Articles
| Open Access |
DOI: Improving The Roll Box Of The Saw Gin
Kurbanov Dilmurat Maripjanovich , Assistant Of The Department "Technology Of Primary Processing Of Natural Fibers" Namangan Institute Of Engineering And Technology. Republic Of Uzbekistan, Namangan Umarov Akmal Akparalievich , Phd, Senior Teacher, Department Of "Technology Of Primary Processing Of Natural Fibers" Namangan Institute Of Engineering And Technology. Republic Of Uzbekistan, Namangan. Akhmedkhodjaev Khamit Tursunovich , Professor Of "Technology Of Primary Processing Of Natural Fibers", Doctor Of Technical Sciences Namangan Institute Of Engineering And Technology. Republic Of Uzbekistan, Namangan Ergashev Jamshid Fakhriddin Og’li , Assistant Of The Department "Metrology Standardization And Quality Management" Namangan Institute Of Engineering And Technology. Republic Of Uzbekistan, NamanganAbstract
The article provides a literary review on the design of the saw gin roll box and the regulation of the density of the seed roll. On the basis of the studied, a new design of the roll box of the saw gin is proposed, which will ensure a uniform supply of cotton depending on the density of the seed roll.
Keywords
The Cotton, Saw Gin, Seed,, Fiber, Saw, Roll Box, Seed Roll, Quality, Efficiency, Productivity, Density, Accelerator
References
A.Umarov. Investigation of the density control of a seed roll at the gin. Natural and technical sciences®. Natural and technical sciences®. Moscow, 2008. – № 2 (34). 333-334.
M. A. Abduvakhidov, A. A. Umarov. Research of speed regulation of electric drives of gin feeders. Natural and technical sciences®. - Moscow, 2008. - No. 2 (34). 328-329.
Umarov A.A., K. Ortikova, A.U. Sarimsakov, D. Kurbanov. Analysis of the control of manual and automatic regulation of the saw gin feed rollers. Scientific journal "Universum: technical sciences". Part 2. Moscow, 2020. - 9 (78). 22-26. https://7universum.com/ru/tech/archive/item/10693
Umarov A., Ortikova K., Sarimsakov A. Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Scientific Research Publishing, Engineering, 2020, 12, 715-722. DOI: 10.4236/eng.2020.1210050.
Umarov A., Akhmedkhodzhaev Kh., Sarimsakov A., Kenjaeva M. The Saw Gin Stand with Adjustable Movement of the Roll Box. Scientific Research Publishing, Engineering, 2018, 10, 486-494. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108034.
Sarimsakov A., Muradov R., Umarov A., Kurbanov D. Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Scientific Research Publishing, Engineering, 2018, 10, 521-529. http://www.scirp.org/journal/eng, https://doi.org/10.4236/eng.2018.108038.
Kh.Axmedxodjayev, A.Umarov, K. Ortiqova. Investigation of the Ginning Process on ДП Series Saw Gin Stands. Scientific Research Publishing, Engineering, 2019, 11, 523-530 http://www.scirp.org/journal/eng.
A.U. Sarimsakov, D. M. Kurbonov, Sh., H. Halikov. The study of the crucible rotation of raw materials with a practical way. Scientific-practical journal "Economics and Society" No. 12 (67) -2019 (December) https://iupr.ru/nauchno_prakticheskiy_zhurnal__ekonomika_i_socium___12_67__2019_g___dekabr_/.
A.Sarimsakov, R.Muradov, B.Mardonov. Modeling Of the Process of Interaction of the Saw Cylinder with the Raw Material In The Process Of Ginning. Published by: The Mattingley Publishing Co., Inc. May-June 2020. ISSN: 0193-4120 Page No. 27386– 27391.
Article Statistics
Copyright License
Copyright (c) 2020 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.