Articles
| Open Access |
DOI:
https://doi.org/10.37547/tajas/Volume02Issue09-24
Technology Of Modified Sodium-Aluminum Catalysts For Nitrogen Gas Purification Systems
Mirzarakhimov Mirsolikh Sultonovich , Doctor Of Technical Sciences, Professor, Professor, Department Of Life Safety, Faculty Of Mining And Metallurgy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Iskandarov Jakhangir Ravshan Ogli , Doctoral Student Of The Department “Objects Of Oil And Gas Processing” Of The Faculty Of Geologybacklight, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Umirzoqov Azamat Abdurashidovich , Doctoral Student, Department Of Mining, Faculty Of Mining And Metallurgy, Tashkent State Technical University Named After Islam Karimov, Tashkent, Uzbekistan Amanov Tolib Sirozhevich , Uzbek Institute Of Geotechnical And Non-Ferrous Metallurgy Research And Project Search “O’zgeorangmetliti” Engineer Of The Mining Department Of The State Unitary Enterprise, UzbekistanAbstract
The introduction of the method of chemical trapping of nitrogen oxides in a complex with selective catalytic purification of tail gases from industrial production makes it possible to increase the service life of the catalyst regardless of the NOx concentration, create a cycle of low-waste technology and achieve significant savings in the consumption of the scarce AVK-10 catalyst ... Reuse of the spent catalyst AVK-10 in the process of cleaning tail gases of industrial production from NOx and absorption-catalytic cleaning of the latter with the use of solid waste products allows simultaneously solving environmental and economic problems in the production of weak nitric acid.
The prospect of using the waste of lead-concentrating factories as a natural sorbent-catalyst in gemological is substantiated. processes of purification of waste gases of sulfuric acid production.
The proposed chemisorption-catalytic method for purifying waste gas mixtures from sulfur dioxide does not require special preparation of a wet, high-temperature dusty gas. The use of natural materials within the framework of this method allows you to extract from them valuable raw materials - metal oxides.
Keywords
Gas, chemically
References
Molokanov Yu.K. Processes and apparatuses for oil and gas refining: Textbook for technical schools / Yu.K. Molokanov (series "Processes and Apparatuses of Chemical and Petrochemical Technology"). M .: Chemistry, 1980. 408 e.
Margulov R.D., Korotaev Yu.P. Dobycha, podgotovka va transport prirodnogo gaza va kondensa. Spravochnoe rukovodstvo v 2-x tomax. Tom 1. // Nedra. M., 1984. T. 1. S. 360.
Axmetov S.A., Bayazitov M.I., Kuzeev I.R., Serikov T.P. Texnologiya i oborudovanie protsessov pererabotki nefti i gaza // red. S.A. Axmetova / Nedra. SPb., 2006. S. 868
Donskix B.D. Razrabotka metodov isledovaniya effektivnosti raboty ustanovok promyslovoy podgotovki prirnnogo gaza: Dissertatsiya na soiskanie uchenoy stepeni k.t.n. // Gazprom VNIIGaz. M., 2011. S. 144.
Zhumaev K.K., Iskandarov J.R., Tukhtaev B.B. Development and use of small absorption plants / Questions of science and education №.2(3), Elektronic journal, 2017. - 256 p.
Iskandarov J.R. Development and use of small-sized absorption installation // Geodesic and surveying problems of cadastral work at the mining and metallurgical industry "Tashkent", 2018. - 265 p.
Mirzaraximov M.S., Iskandarov J.R., Xojibolaev Y.Yu. Analiz vliyaiya gazovyx vybrosov na okrujayushchuyu sredu // Nauka, texnika i obrazovanie 2020. № 2 (66). –S. 5-9.
Mirzarakhimov M.S., Hayitov O.G., Musayev M.N., Iskandarov J.R., Umirzoqov A.A. DESIGN OF GAS TECHNOLOGICAL SYSTEMS USING MATHEMATICAL MODELS. / Тhe International journal of analytical and experimental modal analysis. ISSN NO:0886-9367. Volume XII, Issue VII, July/2020. Page: 2263-2273
Nasirov U.F., OchilovSh.A., Umirzoqov A.A. Analysis of Development of Low-Power and Man-Made Gold Deposits// International Journal of Academic and Applied Research (IJAAR)ISSN: 2643-9603 Vol. 4, Issue 4, April – 2020, Pages: 71-74. http://ijeais.org/wp-content/uploads/2020/4/IJAAR200414.pdf
Umirzoqov A.A., Jurayev S.J., KaramanovA.N. Economic and mathematical modeling of rational development of small-scale and man-made gold deposits// International Journal of Academic and Applied Research (IJAAR), Vol. 4, Issue 4, April – 2020, Pages: 75-77. http://ijeais.org/wp-content/uploads/2020/4/IJAAR200415.pdf
Hayitov O.G., Umirzoqov A.A., Iskandarov J.R., Suvanov F.R. Prospects for the industrial use of coal in the world and its process of reproducing// Novateur Publication’s JOURNALNX- A Multidisciplinary Peer Reviewed Journal, Volume 6, Issue 5, may-2020, Pages:240-247. https://journalnx.com/journal-article/20151009
OchilovSh.A., Umirzoqov A.A., KaramanovA.N., Ergashev O.S. Calculation of the Optimal Distance Between Parallel-Converged Charges When Exploding High Ledges// International Journal of Academic Management Science Research (IJAMSR), Vol. 4 - Issue 6 (June - 2020), Pages:57-61. http://www.ijeais.org/ijamsr/index.php/ijamsr-4-6-2020/
Kazakov A.N., Umirzoqov A.A., Radjabov Sh.K., Miltiqov Z.D. Assessment of the Stress-Strain State of a Mountain Range// International Journal of Academic and Applied Research (IJAAR), Vol. 4 - Issue 6 (June - 2020), Pages:17-21. http://www.ijeais.org/ijamsr/index.php/ijamsr-4-6-2020/
Nasirov U.F., Ochilov Sh.A., Umirzoqov A.A. Theoretical Calculation of the Optimal Distance between Parallel-close Charges in the Explosion of High Ledges//(SCOPUS) Journal of Advanced Research in Dynamical and Control Systems – JARDCS, Vol. 12,07-special issue, 2020, Pages: 2251-2257. https://www.jardcs.org/abstract.php?id=5778
Umirzoqov A.A., Karamanov A..N., Radjabov Sh. K. Study of the feasibility of using intermediate buffer temporary warehouses inside the working area of the Muruntau quarry// International Journal of Engineering and Information Systems (IJEAIS), Vol. 4, Issue 8, August – 2020, Pages140-142. http://www.ijeais.org/ijeais/index.php/ijeais-4-8-2020/
Article Statistics
Downloads
Copyright License
Copyright (c) 2020 The American Journal of Applied sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.