Articles
| Open Access |
DOI: Material Handling Mechanisms In The Sewing Machine
Tursunova Gulbahor Sharofovna , Doctorant, Department Of Technology Of Light Industry, Bukhara Engineering Technological Institute, UzbekistanAbstract
This article gives a detailed analysis of the material handling mechanism in a sewing machine. The construction and their working principle are presented.
Keywords
Mechanism, material
References
Ganchini Shukhratzoda, A.Djuraev, M.A.Mansurova, S.Dj.Mukhamedjanova, "Design development and mathematical model of vibrations of plates of the tension regulator of the tension needle sewing machine"/ International Journal of Advanced Research in Science, Engineering and Technology. Vol. 6, Issue 7, July 2019, p.10208-10210.
Bozorova Farida, Mukhamedjanova Sabrina “Simulation Of Forced Vibrations Of The Elements Of A Sewing Machine’s Compound Foot” Acta of Turin Polytechnic University in Tashkent: Vol. 10 : Iss. 3 , Article 5.p.22-25.
А.Djuraev , K.Yuldashev , C.Dj.Muxamedjanova “Calculation of the power of the undulating surface of the screw conveyor for cleaning lint” Acta of Turin Polytechnic University in Tashkent: Vol. 10 : Iss. 4 , Article 3.p. 59-64
Djurayev A., M.A.Mansurova, G.Sh.Tursunova, M.X. Shirinova “Effect of the Stitch Length on the Breaking Load of Stitches of Sewing Products” International Journal of Advanced Research in Science, Engineering and Technology Vol. 6, Issue 9 , September 2019.
Juraev Anvar and Rajabov Ozod, “Analysis of the interaction of Fibrous Material with a Multifaceted Grid of the cleaner”, International Journal of Recent Technology and Engineering, Vol. 8, No. 1, (2019), pp. 2661-2666.
Djurayev A., Sh. Daliev, A. Zukhriddinov “Development of the resource-saving structure of the section of small purification of fiber material” International Journal of Advanced Research in Science, Engineering and Technology Vol. 6, Issue 2, February 2019 p.8080-8083.
Article Statistics
Downloads
Copyright License
Copyright (c) 2021 The American Journal of Applied sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.