★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★Open research. Global perspectives.
editor@theamericanjournals.comPublisher Home ↗
Applied Sciences OPEN ACCESS

Change Of Cotton Fiber Quality Indicators Under Technological Processes

Mirjamol Mirkarimovich Mirxojaev
Doctor Of Philosophy (PhD), Department Of Metrology, Standardization And Quality Management, Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan
Dilmuhammad Davronbek Ogli Atambayev
Assistant, Department Of Metrology, Standardization And Quality Management, Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan
Ismoiljon Isroiljon Ogli Lutfillaev
3rd Year Student, Department Of Metrology, Standardization And Quality Management, Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan
Jamshidbek Maripjon Ogli Jurayev
3rd Year Student, Department Of Metrology, Standardization And Quality Management, Namangan Institute Of Engineering And Technology, Republic Of Uzbekistan
DOI Crossref DOI 10.37547/tajas/Volume03Issue04-34
tajas 2021
VOL. 3 / NO. 04 APRIL
FULL TEXT PP. 241-249
DOWNLOAD PDF

View all articles in this issue ↗

VOLUME 3
ISSUE 04
YEAR 2021
PAGES 241-249
RESEARCH OVERVIEW

Abstract

In this article, the quality indicators of fiber under the influence of various technological processes of Sultan selection cotton were determined and the optimal variant of the technological process for  production  was recommended.

Basic expressions tangled fiber, cortical fiber, knot, staple mass length, specific tensile strength, fiber maturity.

RESEARCH TOPICS

Keywords

Flagella skin with fiber

Downloads

Download data is not yet available.
SOURCES & SCHOLARSHIP

References

  1. Khamraeva, S. A., Yusupova, N. B., Atambaev, D. D. O., & Hasanov, M. H. O. (2020). The Importance Of The Extension Tool In Reducing The Inequality Of Yarn. The American Journal of Engineering and Technology, 2(08), 39-44. https://doi.org/10.37547/tajet/Volume02Issue08-05
  2. Atambayev, D. D. O. (2020). Analysis Of Fibrous Wastes Generated During Spinning Of Cotton Fiber In The Re-Spinning System. The American Journal of Engineering and Technology, 2(09), 86-90. https://www.usajournalshub.com/index.php/tajet/article/view/960
  3. Dilmuhammad Davronbekogli Atambayev, Muhriddin Hakimjonogli Hasanov, Analysis of Fibrous Waste Generated in the Preparation Departments of Spinning Mills and Cotton Processing. http://www.ijarset.com/volume-7-issue-9.html#
  4. Korabayev Sh.A; Matismailov S.L; Yuldashev A.T., Atanbayev D.D. (2020) “Study Of Fiber Movement Outside The Crater Of Pnevmomechanical Spinning Machine”, Solid State Technology. Vol. 63 : Iss. 6. Pages 3460-3466. http://www.solidstatetechnology.us/index.php/JSST/article/view/3473
  5. Atambaev Dilmukhammad Davronbek ogli1, Olimjonov Dilshodbek Khasanboy ogli ACADEMICIA: An International Multidisciplinary Research Journal , Production of arkok (enlama) hair wool fabrics on modern flexible fabric knitting machine in textile ( 2294) Last page:(2299)https://www.indianjournals.com/ijor.aspx?target=ijor:aca&volume=10&issue=11&article=367
  6. Jitendra P.S, Swedesh V. Woven Terry Fabrics, Woodhead Publishing Series in Textiles Volume Number: 184.
  7. Kosimov, A. A., Bakhriddinova, S. F. K., & Abdulazizov, S. A. O. (2020). Classification Of Terry Products Made Of Natural Fiber. The American Journal of Engineering and Technology, 2(11), 133-141. https://doi.org/10.37547/tajet/Volume02Issue11-21
  8. Karahan M. Experimental investigation of the effect of fabric construction on dynamic water absorption in terry fabrics. Fibres Text East Eur 2007;15(3):74–80.
  9. А.Г. Севастьяновни “Методы и средства исследования механико­технологических процессов текстильной и легкой промышленности”.
  10. Atanbayeb Dilmuhammad Каримов Р.К., Mirjamol Mirxojayev Mirkarimovich.,Ahtam Qosimov Akramovich, “Анализы качество хлопкового волокна и приборы на тестировании”, НАУЧНО-ТЕХНИЧЕСКИЙ ЖУРНАЛ ФерПИ, 2019/3, 162-163.
  11. Kosimov Ahtam Akramovich Abdullayev Ulugbek To'lanboyevich, Mirjamol Mirxojayev Mirkarimovich, Oqboyev Alisher Rasuljanovich, Анализ производство ткань для дублирин из отходов волокнистых материалов гребнечёсяльного системы, НАУЧНО-ТЕХНИЧЕСКИЙ ЖУРНАЛ ФерПИ, 2018/12, спец. вып. № 3, 42-46.
  12. Башриддинова Ш Қосимов Ахтам Акрамович, Мирхожаев М, Оқбоев А, “Методы определения капиллярностьи текстильных тканьей”, НАУЧНО-ТЕХНИЧЕСКИЙ ЖУРНАЛ ФерПИ, 2018/12, спец. вып. № 3, 166-169.
  13. Башриддинова Ш Қосимов Ахтам Акрамович, Маматханова О, “Тўқимачилик материалларини капиллиярлигини аниқлаш”, Наманган Халқаро конференция тўплами 2018 йил, 2018/6, 223.
  14. Mirkhojayev Mirjamol Mirkarimovich; Ahmadjanov Sukhrob Bakhtiyor ogli “The study of physical and mechanical properties of different fabrics for suit gauze” ACADEMICIA An International Multidisciplinary Research Journal (Double Blind Refereed & Peer Reviewed Journal) №2 November 2020 Pages 1049-1055. https://saarj.com/wp-content/uploads/ACADEMICIA-NOVEMBER-2020-FULL-JOURNAL.pdf
  15. Mirkhojayev Mirjamol Mirkarimovich; Egashov Bahodir Abdumukhtor o`gli. “Analysis of determination of cotton field quality as aresult of changes in technological processe” SAARJ Journal on
  16. Banking &Insurance Research (SJBIR ) №9 November2020. Pages 38-44. https://saarj.com/sjbir_current-issue/
  17. Mirkhojayev Mirjamol Mirkarimovich; Ergashov Jamshid Fakhridin ogli. “Analysis Of Tanda Yarn Fiber Quality Indicators In Cotton Yarn Hardened Fabric Production” The American Journal Of Engineering And Technology №2 September 2020. Pages 82 https://usajournalshub.com/index.php/tajet/article/view/959
  18. Mirkhojayev Mirjamol Mirkarimovich. “Method Of Assessing The Bending Resistance Of Yarns In Suit Folding Fabrics”. The American Journal Of Engineering And Technology №2 September 2020 Pages 98-100. https://www.usajournalshub.com/index.php/tajet/article/view/962
  19. Mirkhojayev Mirjamol Mirkarimovich; Iskandarov Orifkhon Fozilkhon o`gli “The Study Of The Fineness Of Textile Materials In Small Manufacturing Enterprises” The American Journal Of Engineering And Technology №2 November 2020. Pages 174-178 https://usajournalshub.com/index.php/tajet/article/view/1533
  20. Максудов, Н. Б., Нигматова, Ф. У., Юлдашев, Ж. К., & Абдувалиев, Р. Р. (2018). Анализ деформационных свойств высокоэластичных трикотажных полотен для проектирования спортивной одежды. Universum: технические науки, (9 (54)).
  21. Yuldashev, J. Q., & Bobojanov, H. T. (2020). Study Of The Influence Of The Parameters Of The Sampling Zone On The Condition Of The Capture Of Fibers By The
  22. Drum Teeth. The American Journal of Engineering and Technology, 2(08), 75-78. https://doi.org/10.37547/tajet/Volume02Issue08-11
  23. Bobojonov, H. T., Yusupov, A. A., Yuldashev, J. Q., & Sadikov, M. R. (2020). Influence of deformation properties of yarn on the quality of knitted fabric. Test Engineering and Management, 29502-29513.
  24. Оқбоев А.Р. Тикув-трикотаж саноати корхоналарининг портфель стратегияларидан фойдаланиш имкониятлари. // Иқтисодиёт ва инновацион технологиялар илмий электрон журнали. 2021 йил 1-сон. (08.00.00; №10).
  25. Оқбоев А.Р. Тикув-трикотаж корхоналарида брендинг стратегиясини ишлаб чиқиш методологияси. // Бизнес-эксперт журнали. 2020 йил 7-сон. 115-119 бетлар (08.00.00; №3).
  26. Оқбоев А.Р. Тикув-трикотаж корхоналарида бренд рақобатбардошлигини бошқариш. // Иқтисодиёт ва таълим. 2020 йил 6-сон. 132-137 бетлар (08.00.00; №11).
  27. Okboyev A.R. Social Network Marketing and Its Development // International Journal of Research in Management & Business Studies (IJRMBS 2020). Vol. 7 Issue 3 July - Sept. 2020. Impact Factor: SJIF№23 2016= 7.05. ISSN: 2348-6503 (Online) ISSN : 2348-893X (Print) pp. 38-42.
  28. Okboyev A.R., O.J.Ashurkulov Directions for the introduction of an integrated quality management system to increase the competitiveness of light industry enterprises // South Asian Journal of Marketing & Management Research (SAJMMR). Vol.10, Issue 11, November 2020 Impact Factor: SJIF№23 2020= 7.11. pp. 107-10.