Factors for Increasing the Regeneration Efficiency of Cotton Regenerators and Their Analysis
Djamolov R.K. , Scientific Research Institute of Fiber Crops, Uzbekistan Karimov T.K. , Scientific Research Institute of Fiber Crops, UzbekistanAbstract
This article analyzes the operational efficiency of 1RX, RX, RX-1, and 2RX-M cotton regenerators, widely used in cotton ginning enterprises, in relation to waste composition. Based on experimental results, it is substantiated that an above-normal content of cotton pieces in the waste separated from the UXK cleaning system reduces the regeneration efficiency of existing regenerators. Based on this analysis, proposals have been developed to increase regeneration efficiency by improving the quality of waste loosening and the separation of cotton pieces during the regeneration process.
Keywords
Cotton regenerator, UXK cleaning system, cotton pieces
References
"Development and mastering of serial production of a new saw cleaner for raw cotton from large trash," R&D report, P.N. Borodin, JSC "Paxtasanoat ilmiy markazi," Tashkent, 2012.
Abidova A.R., Djamolov R.K. Development of a device design for cotton waste regeneration // Universum: technical sciences, 2023, No. 5 (110).
Utility Model Patent FAP 00313. Fibrous material cleaner. Tashkent, 2007.
Borodin P.N. et al. Improvement of the technological process for processing regenerated fly waste..., STO topic 9311, RNS "Khlopkoprom," Tashkent, 1994.
Patent IAP 003913 RUz. "Drum for loosening and cleaning raw cotton," 2002.
Kuliyev T.M., Djamolov R.K., Ismoilov U.M., Turdiyev M. Determining the dependency of the cotton regenerator's performance indicators on the rotational speed of the spiked separating drum. STJ FerPI, 2022, special issue No. 7.
Handbook on Primary Cotton Processing. Book 1. Tashkent: "Mexnat," 1994. pp. 238-240.
Download and View Statistics
Copyright License
Copyright (c) 2026 Djamolov R.K., Karimov T.K.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.


Engineering and Technology
| Open Access |
DOI: