Articles
| Open Access |
DOI: Improving The Technology Of Continuous Casting Of Steel Castings
Furkat Odilov , PhD Student, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan Farrukhjon Abdullaev , Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan Alisher Fatkhullaev , Master Student, Department Of Machinery Technology, Namangan Engineering - Construction Institute, UzbekistanAbstract
This article describes the quality and cost-effectiveness of converting steels by melting them in electric arc furnaces. In addition, the technology of continuous casting of cast products in the furnace with the help of ferroalloys, followed by various equipment.
Keywords
Steel, carbon, element
References
Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.
Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.
Turakhodjaev N. et al. Development Of A New Brand Of Alloy Instead Of 280x29nl Brand Spreadable Cast Alloy //The American Journal of Engineering and Technology. – 2021. – Т. 3. – №. 03. – С. 36-43.
Turakhodjaev N. D. et al. Analysis Of The Effect Of Chromium Content On The Mechanical Properties Of White Cast Iron //The American Journal of Engineering and Technology. – 2021. – Т. 3. – №. 01. – С. 65-76.
Bekmirzaev S., Saidmakhamadov N., Ubaydullaev М. Obtaining sand-clay casting". Theory and practice of modern //Russia. – 2016. – №. 4 (12). – С. 112.
Nodir T. et al. Development Of Technology To Increase Resistance Of High Chromium Cast Iron //The American Journal of Engineering and Technology. – 2021. – Т. 3. – №. 03. – С. 85-92.
SHIRINKHON T., AZIZAKHON T., NOSIR S. Methods For Reducing Metal Oxidation When Melting Aluminum Alloys //International Journal of Innovations in Engineering Research and Technology. – 2020. – Т. 7. – №. 10. – С. 77-82.
Nodir T. et al. Development of composition of wear-resistant white pig iron with a stable structure obtained by the casting method //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 7. – С. 33-39.
Саидмахамадов Н. и др. ОБЩАЯ ТЕХНОЛОГИЯ ПРОИЗВОДСТВА ПОРОШКОВО КОНСТУКЦИОННЫХ МАТЕРИАЛОВ //Экономика и социум. – 2019. – №. 4. – С. 673-680.
Саидмахамадов Н. и др. ТЕХНОЛОГИЯ ПРЕДОТВРАШЕНИЯ ПОР В ОТЛИВАХ //Экономика и социум. – 2019. – №. 4. – С. 661-672.
Саидмахамадов Н., Хайдаров У., Эгамбердиев Б. УЛУЧШЕНИЕ ПОДГОТОВКИ ТЕХНОЛОГИЙ МЕТОДОМ СПЕЦИАЛЬНОГО СЛИВАНИЯ //Экономика и социум. – 2019. – №. 4. – С. 651-660.
Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.
Nodir, T., Sherzod, T., Ruslan, Z., Sarvar, T., & Azamat, B. (2020). STUDYING THE SCIENTIFIC AND TECHNOLOGICAL BASES FOR THE PROCESSING OF DUMPING COPPER AND ALUMINUM SLAGS. Journal of Critical Reviews, 7(11), 441-444.
TURAKHODJAEV, N., TURSUNBAEV, S., UMAROVA, D., KUCHKOROVA, M., & BAYDULLAEV, A. Influence of Alloying Conditions on the Properties of White Cast Iron. International Journal of Innovations in Engineering Research and Technology, 7(12), 1-6.
Turakhodjaev, N., Turakhujaeva, S., Turakhodjaev, S., Tursunbaev, S., Turakhodjaeva, F., & Turakhujaeva, A. (2020). Research On Heat Exchange In Melting Process. Solid State Technology, 63(6), 6653-6661.
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.