Articles
| Open Access |
DOI: Modern Trends in Heat Treatment of Chromium-Molybdenum Steel
Khasanov Abdurashid Solievich , Professor, Doctor of Technical Sciences, Almalyk Branch, National University of Science and Technology "MISIS", Almalyk, Uzbekistan Utkir Mirzakamolovich Khalikulov , Associate Professor, Almalyk Branch, National University of Science and Technology "MISIS", Almalyk, Uzbekistan Djeparova Medine Narimanovna , Student, Almalyk Branch National University of Science and Technology "MISIS", Almalyk, UzbekistanAbstract
This article discusses the heat treatment temperature regimes of chromium-molybdenum steel and their impact on the material's mechanical properties. The main heat treatment methods, including annealing, normalizing, quenching, and tempering processes, are analyzed. The influence of various processing regimes on the formation of the structure and the operational characteristics of the steel is studied. Optimal parameters that enhance strength, ductility, and wear resistance are identified. The obtained results enable the development of efficient heat treatment technologies that meet the requirements of various operating conditions.
Keywords
Heat treatment, chromium-molybdenum steel, modification
References
Sadovsky V.D., Popov A.A. "Diagrams of Kinetics of Transformation of Undercooled Austenite" // Metallography and Heat Treatment of Steel. Handbook. Vol. I / Edited by M.L. Bernstein, A.G. Rakhstadt. Moscow: State Scientific and Technical Publishing House for Ferrous and Non-Ferrous Metallurgy, 1961. Pp. 616–669.
Davenport E.S., Bain E.C. "Transformation of Austenite at Constant Subcritical Temperature" // Trans. AIME. 1930. Vol. 90. P. 117–154.
Harold W. Paxton. Commentary by: "Transformation of Austenite at Constant Subcritical Temperatures" // Metallurgical Transactions. 1970. Vol. 1. Iss. 12. P. 3479–3501.
Chernov D.K. "Selected Works on Metallurgy and Metallurgical Science" Moscow: Nauka, 1983. Pp. 9–48.
Tschernoff D.K. "A Critical Review of Articles by Lavrov and Kalakoutzky on Steel and Steel Ordnance, with Original Investigations on the Same Topic" // Proceedings of the Institution of Mechanical Engineers. June 1880. Vol. 31. No. 1. Pp. 286–307.
Chernov D.K. "Selected Works on Metallurgy and Metallurgical Science" Moscow: Nauka, 1983. Pp. 70–99.
Gorynin I.V. "Reflections with Optimism" St. Petersburg: Polytechnical University Publishing House, 2014. 526 p.
Dyachenko S.S. "Formation of Austenite in Iron-Carbon Alloys" Moscow: Metallurgiya, 1982. 128 p.
Article Statistics
Downloads
Copyright License
Copyright (c) 2025 Khasanov Abdurashid Solievich, Utkir Mirzakamolovich Khalikulov, Djeparova Medine Narimanovna
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.