Specific Features Of The Properties Of High-Strength Concrete
Yusupov R.R. , Candidate of technical sciences, professor, Tashkent University of Architecture and Construction, The Republic of Uzbekistan, Uzbekistan Khujaev D.Kh. , PhD, associate professor, Tashkent University of Architecture and Construction, The Republic of Uzbekistan, Uzbekistan Khikmatkhujaev I.Sh. , Master’s student, Tashkent University of Architecture and Construction, The Republic of Uzbekistan, Uzbekistan Salomov A.A. , Tashkent University of Architecture and Construction, The Republic of Uzbekistan, UzbekistanAbstract
The application of high-strength concrete reduces the self-weight of reinforced concrete structures, decreases cross-sectional dimensions, and enables the creation of rational structural forms of elements, which is important for improving their operational performance.
This article summarizes the properties of high-strength concrete based on the results of several studies conducted to investigate their main characteristics. According to the research results, the specific features of such concrete are determined by the quality of the materials used, concrete production technology, and operating conditions under load.
At present, new experimental and theoretical studies are planned in order to further expand research in this field and introduce high-strength concrete into construction practice. One of the main objectives is the application of high-strength concrete in multi-storey reinforced concrete frame residential and public buildings.
Keywords
High-strength concrete, properties, reinforced concrete
References
GOST 31914-2012. High-strength heavy and fine-grained concretes for monolithic structures. Rules for quality control and assessment. Moscow: Стандартинформ (“Standartinform”), 2014.
Abdazov, D.R. Compacted concrete based on local raw materials. PhD dissertation abstract in specialty 05.09.05 – Construction materials and products. Tashkent, 2025.
Goldenberg, A.L. Operational properties of high-strength concrete subjected to periodic exposure to alternating temperatures. Proceedings of the RUCEM Conference: Issues of quality, durability, and safety of construction materials. Moscow, 2014.
EN 1992-1-1:2023. Eurocode 2 – Design of concrete structures – Part 1-1: General rules and rules for buildings, bridges, and civil engineering structures. CEN, 2023.
SP 63.13330.2012. Concrete and reinforced concrete structures. General provisions.
KMK 2.03.01-21. Concrete and reinforced concrete structures.
GOST EN 206-1. Concrete. General technical requirements, production, and quality control.
GOST 10180-2012. Methods for determining strength using control specimens. Moscow: Стандартинформ (“Standartinform”), 2018, 32 p.
GOST 24452-2023. Concretes. Methods for determining prismatic strength, modulus of elasticity, and Poisson’s ratio. Moscow, 2024.
Usmanov, V.F. Theory of reinforced concrete resistance. Rod elements. Samarkand, 2021, 107 p.
Yusupov R.R., Khujaev D.Kh, & Khasanov B.B. (2022). STUDY OF BONDING OF LOCALLY PRODUCED REINFORCEMENT WITH MEDIUM-STRENGTH CONCRETES. The American Journal of Engineering and Technology, 4(09), 10–16. https://doi.org/10.37547/tajet/Volume04Issue09-03
Юсупов Рахимбай Рихсибаевич, Юсупходжаев Саидгани Абдуллаходжаевич, and Хужаев Давлатхужа Хасан Угли. "ВЛИЯНИЕ КОНСТРУКТИВНЫХ И ТЕХНОЛОГИЧЕСКИХ ФАКТОРОВ НА ПРОЧНОСТЬ СЦЕПЛЕНИЯ АРМАТУРЫ С БЕТОНОМ" Universum: технические науки, no. 12-3 (117), 2023, pp. 57-63. https://doi:10.32743/UniTech.2023.117.12.16473
Юсупов Р. Р. и др. ДЕФЕКТЫ И ПОВРЕЖДЕНИЯ ЖЕЛЕЗОБЕТОННЫХ КОНСТРУКЦИЙ КАРКАСНЫХ ЗДАНИЙ В СЕЙСМИЧЕСКИХ РАЙОНАХ //GOLDEN BRAIN. – 2024. – Т. 2. – №. 5. – С. 190-200.
Yusufkhojaev Saidgani, Yusupov Rakhimbay, Alimov Khikmat, and Khodjayev Davlatkhuja. "DEFORMABILITY OF REINFORCED CONCRETE BEAMS WITH CABLE REINFORCEMENT WITHOUT CRACKS" Universum: технические науки, vol. 7, no. 3 (132), 2025, pp. 11-19. https://doi:10.32743/UniTech.2025.132.3.19510
Akramov K., Yusupov R., Ergashov J. Efficient technology of basalt fiber-reinforced concrete for use in monolithic construction //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 452. – С. 06003.
Download and View Statistics
Copyright License
Copyright (c) 2026 Yusupov R.R., Khujaev D.Kh., Khikmatkhujaev I.Sh., Salomov A.A.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.


Engineering and Technology
| Open Access |
DOI: