Articles
| Open Access |
DOI: METROLOGICAL SUPPORT OF INFORMATION MEASUREMENT SYSTEMS
Obidov Jamshidbek , Associate professor of Fergana polytechnic institute, UzbekistanAbstract
In this article, the main trend determining the development of measurements in the field of automated production is the transition to automatic control using adaptive models, as well as the use of more effective control and information-measurement systems in the field of mobile metrology. This means that today the value of metrological characteristics of measurement channels begins to increase sharply, taking into account not only the metrological characteristics of the blocks included in the measurement channel, but also the influence of the channels on each other. On the basis of mobile metrology, many control and measurement works are carried out in modern industrial production, for example, in oil fields and other technological fields. This article mainly presents opinions on the study of information and measurement systems.
Keywords
Measurement system, industrial production, characteristics
References
B.D. Hall, M. Kuster. Metrological support for quantities and units in digital systems. – Available online//Version of Record 17 September 2021.
Approaches to measuring the intelligence of machines by quantifying them.Prerna Kapoor//Article. 2015.
Obidov, J.G. Virtual process modeling technologies based on imitation-variability in technical higher education institutions//E3S Web of Conferences, 2023, 452, 07017 https://doi.org/10.1051/e3sconf/202345207017
Erkaboev, A., Obidov, J., Madmarova, U., Alikhonov, E.//Analysis of the ISO 9001 standard model of risk management in analytical testing laboratories//E3S Web of Conferences, 2023, 452, 06009 https://doi.org/10.1051/e3sconf/202345206009
Article Statistics
Copyright License
Copyright (c) 2024 Obidov Jamshidbek
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.