Articles
| Open Access |
DOI: Improving The Design Of Internal Plates In Columnar Apparatus
Askarov Hasanjon Abdukakhorovich , Assistant, Department Of Technological Machines And Equipment, Fergana Polytechnic Institute, Fergana, Uzbekistan Kamoljon Djamalovich Muhammadsodikov , Associate Professor, Department Of Technological Machines And Equipment, Fergana Polytechnic Institute, Fergana, UzbekistanAbstract
The article analyzes the operation of the distillation column plates used in the chemical and oil refining industries and suggests the use of plates with a new design. According to the experimental results, the hydraulic resistance of the plates of the new design is smaller than the hydraulic resistance of the traditional plates.
Keywords
Fraction, condensate, rectification
References
Askarov H., Isomidinov A. (2021). Analysis of the locations of the rectification tower in the OA "Farg'onaazot". “Economics and Society” No. 1 (80).
Askarov X., Axunboev O., Voxidova N. (2018). Optimization of acetic acid rectification column of JSC "Ferganaazot". Proceedings of the international scientific-practical conference "Problems of increasing the efficiency of modern production and energy efficiency." Andijon. pp.822-824.
Askarov H., Muhammadsodiqov K.J., Voxidova N., Rakhimova M. (2019). Study of material and heat balances of rectification processes. The first international scientific and practical conference at enterprises for the production of building materials, the chemical industry and in related industries in Fergana. 5-volume. pp. 277-280.
Askarov X., Rajabova N., Isomidinov A. (2020). Analysis of the plates of the rectification column in JSC "Ferganaazot". Materials of the IV online conference "Youth activity in the construction and development of a new Uzbekistan", Namangan State University. pp.87-90.
Аskarov Х., Isomidinov А. (2020). Analysis of rectification column plates in “Ferganaazot” JSC. XXVI International Scientific Conference “Modern scientific challenges and trends”. Warsaw Poland.
Askarov X., Akhunboyev A., Tuychieva SH. Constructive analysis of plate columns. Scientific-practical conference dedicated to the 2018 Year of Entrepreneurship, Support of Innovative Ideas and Technologies in the Republic of Uzbekistan November 7-8 Fergana 2018 Part 1 3-5 pages
Askarov X., Axunboyev A. (2018). Methods of accelerating processes in heat exchangers. Providing the consumer market with quality food is an important factor in prosperity and development. Materials of the Republican scientific-practical conference. Fergana. pp.242-244.
Askarov H., Akhunbaev A., Voxidova N. (2018) Optimization of acetic acid rectification column of JSC "Ferganaazot". Proceedings of the international scientific-practical conference "Problems of increasing the efficiency of modern production and energy efficiency." Andijon pp.822-824.
Askarov H., Mukhamadsodikov K., Abdullaeva D. (2019). Modernization of plates of the column apparatus for the regeneration of acetic acid. Republican scientific and scientific-technical conference "Innovative technologies in the design, construction and operation of engineering communications" Fergana, pp.171-173.
Askarov X. (2020). The role of acetic acid in industrial production. Proceedings of the 15th Republican Multidisciplinary Scientific Remote Online Conference on Scientific and Practical Research in Uzbekistan. Tashkent. pp.107-109.
Askarov X., Khalilov I. (2020). Investigation of the laboratory device model of the rectification column apparatus. Proceedings of the 16th Republican Multidisciplinary Scientific Remote Online Conference on Scientific and Practical Research in Uzbekistan. Tashkent. pp.273-274.
Askarov X., Qaxorov I. (2020). Modernization of plates of the rectification column in JSC "Ferganaazot". Republican distance scientific-practical conference of students and masters on "Promising youth of Uzbekistan". Tashkent. pp.88-91.
Askarov X., Khalilov N., Umbarov Yu., Axunboev A.A. (2014). Study of heat exchange processes. Fergana.
Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research (AJMR), 10(2), 11-18.
Razzakov, S. J., Rakhmanov, B. K., & Akhmedov, J. D. (2021). Study Of The Influence Of Light Weather On The Mechanical Properties Of Para-Aramid Filaments. The American Journal of Engineering and Technology, 3(04), 35-41.
Article Statistics
Copyright License
Copyright (c) 2021 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.