Articles
| Open Access |
DOI: SUBSTANTIATION OF RATIONAL METHODS OF EXCHANGE AND LOADING WORKS DURING THE MINING OF RESERVES OF SMALL-SCALE GOLD DEPOSITS
Jabbarov O.I. , Republic Of Uzbekistan, Navoi Region, Navoi, G`alaba shox, Uzbekistan Kurolov A.A. , Republic Of Uzbekistan, Navoi Region, Navoi, Uzbekistan Tukhtashev A.B. , Republic Of Uzbekistan, Navoi Region, Navoi, Tolstoy, Uzbekistan Rakhmatova D.R. , Republic Of Uzbekistan, Navoi Region, Navoi, Pushkin, Uzbekistan Khamroyeva M.O. , Republic Of Uzbekistan, Navoi Region, Navoi, Chonchorboq, UzbekistanAbstract
Studies have been carried out to determine the optimal bench height, recommendations have been made to improve the completeness of extraction of gold-bearing ore and recommended excavation and loading equipment for small-scale deposits. The change in the values of losses and impoverishment of the ore, as well as the gold content in the ore, depending on the height of the ledge for various thicknesses of ore bodies, has been established.
Keywords
Berm, , understep, ore losses
References
Trubetskoy K.N., Krasnyansky G.L., Khronin V.V. Quarry design. - Volume 1. Publishing house of the Academy of Mining Sciences, 2001. - P. 494-500.
Rzhevsky V.V. Open pit mining processes. - Moscow "Nedra", 1978. - S. 18-20.
Shestakov V.A. Design of mining enterprises. Textbook for high schools. - 3rd ed., revised. and additional - M.: MGGU, 2003. - S. 541-544.
Baikov B.N. Reduction of losses and dilution of ores in non-ferrous metallurgy quarries. - M .: "Nedra", 1977. - S. 12-15.
Tukhtashev A.B., Zhabborov O.I. Methodology for determining the indicators of losses and impoverishment for the conditions of small-scale gold deposits. - Navoi, 2020. - P. 2-22
Djuraev RU, Merkulov MV About the possibility of using vortex tubes when drilling exploration wells. // News of universities. Geology and exploration. Moscow. 2013. No. 3. p.76-78 .
Djuraev RU, Merkulov MV Normalization of the temperature regime of wells during drilling with air purge. // - Navoiy , “A. Navoi ", 2016. - 128 p
Article Statistics
Copyright License
Copyright (c) 2022 The American Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.