Engineering and Technology
OPEN ACCESS
Distribution Analysis Of Conveyor Roller Tension
DOI
Crossref DOI
10.37547/tajet/Volume03Issue12-12
tajet
2021
VOL. 3
/ NO. 12
DECEMBER
RESEARCH OVERVIEW
Abstract
The level of conveyorization of mining enterprises is constantly increasing. This article determines the distribution of the forces applied to the cross-sectional surface of the belt, when rocks are transported by belt conveyors, the effect of dynamic forces on the bending of the belt and middle roller length rocks on the basis forces the roller supports.
RESEARCH TOPICS
Keywords
Belt Conveyor
Belt
Roller
Downloads
Download data is not yet available.
SOURCES & SCHOLARSHIP
References
- Shojaatolhoseini S.A. Justification of rational parameters roller support of linear sections of powerful belt conveyors of mining enterprises: author. Cand. tech. Sciences: 05.05.06. - M .: Moscow State Mining University, 2009. p 24
- Radkevich Ya.M., Timiryazev V.A., Ostrovsky M.S. Analytical method for assessing the quality of manufacturing parts of belt conveyors//Mining information and analytical bulletin (scientific and technical journal) Mining informational and analytical bulletin (scientific and technical journal). - 2001. - No. 12. p 8-11
- Perten Yu.A. Conveyor transport of the XXI century // Journal "Transport of the Russian Federation." - St. Petersburg: LLC "T-PRESS", 2005. - No. 1. p 42-43
- Atakulov LN, Khaidarov Sh.B., Istablaev F.F., Narzullaev B.Sh. Investigation of an alternative method of connecting rubber cord belts. Achievements, problems and modern trends in the development of the mining and metallurgical complex IX International Scientific and Technical Conference. 2017
- Atakulov LN, Khaidarov Sh.B., Istablaev F.F., Narzullaev B.Sh. Determination of the method of connecting rubber cord belts. Achievements, problems and modern trends in the development of the mining and metallurgical complex IX International Scientific and Technical Conference. 2017
- Kharchenko V.I. Rationalization of geometric parameters of linear roller bearings of general-purpose belt conveyors at the design stage. / V.I. Kharchenko. - M., 1994 - 248 p.
- Galkin V.I. Modern theory of belt conveyors for mining enterprises. V.I. Galkin, V.G. Dmitriev, V.P. Dyachenko et al. - Moscow: MSGU Publishing House, 2005. - 543 p.
- Lodewijks G. Energy Consumption of Pipe Belt Conveyors: Indentation Rolling Resistance / G. Lodewijks, M. Zamiralova // FME Transactions. - 2012. Vol. 40. - P. 171 - 176.
- Kiriya R.V. Determination of the coefficient of resistance to the movement of the belt along the roller supports of the conveyor, due to the bending of the belt / Kiriya R.V., Maksyutenko V.Yu., Mishchenko T.F.//Geotechnical mechanics: Interdepartmental. Sat. scientific. tr. / IGTM NASU. - Dnepropetrovsk, 2012. - Issue. 106. - S. 140-146.
- Atakulov L.N., Haydarov Sh.B., Ochilov Kh.B., Gaffarov A.A. Application of the scheme of effective conveyor transport in the conditions of Daugiztau quarry. Technical science and innovation. 2021. No. 2. -b. 74-86.
- Atakulov L.N., Kakharov S.K., Haydarov Sh.B. Selection of the optimal method for joining rubber-cord conveyor belts. Scientific, technical and production journal
- "Gorniy jurnal". – Rossiya, Moscow, 2018, # 9 (2254), 97-100 p
- Shakhodjaev L.Sh. Calculation of mine conveyor transport: methodological instruction, Tashkent: 2012