★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★Open research. Global perspectives.
editor@theamericanjournals.comPublisher Home ↗
Engineering and Technology OPEN ACCESS

Analysis Of The Effect Of Chromium Content On The Mechanical Properties Of White Cast Iron

Turakhodjaev N.D.
Professor, Head Of Foundry Technologies Department, Tashkent State Technical University, Uzbekistan
Abdullaev K. Kh
Docent, Department Of Machinery Technology Namangan Engineering Construction Institute, Uzbekistan
Saidmakhamadov N.M.
PhD Student, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
Saidkhodjaeva Sh. N.
Senior Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
Toshmatova Sh.T
Teacher, Department Of Foundry Technologies, Tashkent State Technical University, Uzbekistan
DOI Crossref DOI 10.37547/tajet/Volume03Issue01-12
tajet 2021
VOL. 3 / NO. 01 JANUARY
FULL TEXT PP. 65-76
DOWNLOAD PDF

View all articles in this issue ↗

VOLUME 3
ISSUE 01
YEAR 2021
PAGES 65-76
RESEARCH OVERVIEW

Abstract

This article examines the effect of alloying elements of high chromium cast iron on the corrosion resistance and hardness of the alloy by heat treatment. Carbide formation and elongation strength limits were also analyzed depending on the amount of chromium and nickel. 

RESEARCH TOPICS

Keywords

High-chromium white iron nickel carbide

Downloads

Download data is not yet available.
SOURCES & SCHOLARSHIP

References

  1. Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682.
  2. Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31.
  3. Тураходжаев Н. Д. и др. ОҚ ЧЎЯННИНГ БАРҚАРОР СТРУКТУРАСИНИ ТАЪМИНЛАЙДИГАН ТЕХНОЛОГИЯ ИШЛАБ ЧИҚИШ ВА УНИ ИШЛАБ ЧИҚАРИШ ШАРОИТИДА ЖОРИЙ ҚИЛИШ //Journal of Advances in Engineering Technology. – 2020. – №. 1.
  4. Bekmirzaev S., Saidmakhamadov N., Ubaydullaev М. Obtaining sand-clay casting". Theory and practice of modern //Russia. – 2016. – №. 4 (12). – С. 112.
  5. Djahongirovich T. N., Muysinaliyevich S. N. Important features of casting systems when casting alloy cast irons in sand-clay molds //ACADEMICIA: An International Multidisciplinary Research Journal. – 2020. – Т. 10. – №. 5. – С. 1573-1580.
  6. Бекмирзаев Ш., Саидмахамадов Н., Убайдуллаев М. ПОЛУЧЕНИЯ ЛИТЬЕ В ПЕСЧАНО-ГЛИНИСТЫЕ МЕТОДОМ //Теория и практика современной науки. – 2016. – №. 6-1. – С. 112-115.
  7. Саидмахамадов Н. и др. ОБЩАЯ ТЕХНОЛОГИЯ ПРОИЗВОДСТВА ПОРОШКОВО КОНСТУКЦИОННЫХ МАТЕРИАЛОВ //Экономика и социум. – 2019. – №. 4. – С. 673-680.
  8. Саидмахамадов Н. и др. ТЕХНОЛОГИЯ ПРЕДОТВРАШЕНИЯ ПОР В ОТЛИВАХ //Экономика и социум. – 2019. – №. 4. – С. 661-672.
  9. Саидмахамадов Н., Хайдаров У., Эгамбердиев Б. УЛУЧШЕНИЕ ПОДГОТОВКИ ТЕХНОЛОГИЙ МЕТОДОМ СПЕЦИАЛЬНОГО СЛИВАНИЯ //Экономика и социум. – 2019. – №. 4. – С. 651-660.